| For a few months now, i've been noticing that my innner headlight housing were really foggy...they were "soft white" looking and unclear... so i did a lot of searching here and found out how to remove the whole headlight unit... after taking out one of the headlight units after about 30 minutes, and failing to take out the second one, i proceeded to try to clean the inner lens... i used the bent coat hanger with glass cleaning tissue stuck on the tip and stuck it through the low beam bulb opening...and WHAT A DIFFERENCE!...it took a film of nasty foggy filth, but i noticed it was still foggy...so i did the same thing to the outside of the lowbeam by getting the coathanger through the high beam opening...NOw my headlight bulbs are CRYSTAL CLEAR...no more replacing headlight bulbs with brighter ones and not noticing any difference... So i just did the same thing to the other unit that was still on my car...I realized you don't need to take out the headlight casing to get your headlight Bulbs looking Crystal Clear!!!
I just take a little effort to clean it from the inside the lowbeam housing cuz the tissue may hit the gloare guard before getting to the lens...you have to wiggle it around...
|
