Subject	Help TPS error code 43, service manual diag#33 results
Posted by	qcsolo on May 20, 2003 at 11:52 AM
	This message has been viewed 97 times.
Message	90TT, Ref service manual EF&EC-137 step A gives high 12 volts at terminal f (shall be 5.0V), step B: there is continuity between f and ecu pin 48; step C: voltage is 1.8 all times closed and open; step D: continuity between e and ecu pin 38 is OK; step E: resistance of .064 exist between d and ecu pin 30. My EVC-R & S-AFC throttle wires are connected to ecu pin 16 wire and reads steady 100% on both controllers. The main harness has been completely cut and reconnected with possible errors. How can i get back 5.0 volts at the TPS terminal f black wire which actually cut away because there is engine cut-off at 2000 rpm when it is connected to TPS.
Follow Ups	Help TPS error code 43, service manual diag#33 results - qcsolo 11:52:27 05/20/03 ???????? - Spee 12:09:02 05/20/03
Post a Followup	You cannot reply to this message because you are not logged in.