Subject	I just did mine with high temp stuff also.
Posted by	rockjaw on December 03, 2000 at 1:48 PM
	This message has been viewed 17 times.
In Reply To	Whats the best paint to use on calipers I was posted by DiamondTT on December 03, 2000 at 12:51 PM
Message	I was doing a whole brake job so I removed the calipers but it isn't neccessary if you don't want to. Check the tech section for the procedure. I cleaned them with a chlorinated brake cleaner and a toothbrush and then washed them with regular water. After that, I used 1 coat of high temp primer, followed by two coats of high temp black and 2 coats of high temp clearcoat. All the paint was purchased at a local auto parts stor (Kragen/Checker/Schucks). CLICK CAR FOR MODS LIST
Follow Ups	Whats the best paint to use on calipers I was - DiamondTT 12:51:03 12/03/00 high heat engine enamel with clearcoat (n/m) - TranceSender(ZNA) 13:00:32 12/03/00 Re: Whats the best paint to use on calipers I was - woody69974 13:03:11 12/03/00 Thanks (n/m) - DiamondTT 13:13:43 12/03/00 Go to any auto shop and buy high temp. paint-----> - TRUOMEGA 13:04:19 12/03/00 OK one more question did you guys pull the - DiamondTT 13:16:40 12/03/00 No...it sais to that in the FAQ's but id didnt----> - TRUOMEGA 14:16:30 12/03/00 Re: No...it sais to that in the FAQ's but id didnt----> - Elguapo 15:21:39 12/03/00 the bare metal doesnt need to be protected----> - TRUOMEGA 16:29:34 12/03/00 I just did mine with high temp stuff also. - rockjaw 13:48:45 12/03/00 Re: Whats the best paint to use on calipers I was - Avalon Ent - Racing Division 14:34:56 12/03/00 oops! That center cap isn't straight! - NVMYZTT [ BUSH-CHENEY 2000 ] 15:05:54 12/03/00 I'll try harder next time - sorry (n/m) - Avalon Ent - Racing Division 15:53:51 12/03/00 Nice tires, I love T1S's (n/m) - F8IZHIS 16:03:35 12/03/00 Here it is the best way. - Carlos Ramirez 15:12:42 12/03/00 Here is my results I got some overspray...PIC - Carlos Ramirez 15:16:35 12/03/00 Well, I bought the cheapest spray paint at Scotty's..>> - Kez43 19:28:03 12/03/00
Post a Followup	You cannot reply to this message because you are not logged in.