| Message |
Search for posts on dremeling out old speaker housing to accept 6 1/2 inch round speakers. You will also need to scrap the bose deck, it will not be compatible with aftermarket speakers. I used the existing wiring (must buzz out to find the proper 2 wires that go to the aftermarket deck). Also, make sure of wire polarity at both ends. I did this, using Infinty Kappa 6 1/2 speakers in the doors and Kappa 4x6 in rear bose housings with a Pioneer MP3 Deck. Sound is great. Tip: Do not cut any wires-no need at all. Reuse the old bose connectors. At the deck side, buy a harness that mates to the stock nissan connectors in your dash and the specific stereo deck. Good Luck, Ken
|
 |