Subject	The stroker kit uses 92mm pistons and sleeves the block
Posted by	Carlos Ramirez on April 29, 2003 at 7:33 PM
	This message has been viewed 494 times.
In Reply To	SGP is pushing the envelope with their 90mm pistons. posted by MikeH(Twin GT35BB Incon Z) on April 29, 2003 at 06:51 PM
Message	now that is big. I think MS and JWT had done some testing on the VG30DETT block and found something like a 80% of the blocks tested could not withstand anything greater than a 88mm piston. I think SeedyRom posted it a while back. I figured that I could make up with the displacement with the turbo and therefore only did a 87.5mm piston.
Follow Ups	SGP is pushing the envelope with their 90mm pistons. - MikeH(Twin GT35BB Incon Z) 18:51:40 04/29/03 you can always get another fresh block, or resleeve yours. (n/m) - niXit 19:28:30 04/29/03 Yea...only 1 in 15 is good to bore to 90mm (n/m) - SteamyZ(ZtoyZ.NET) 23:26:43 04/29/03 The stroker kit uses 92mm pistons and sleeves the block - Carlos Ramirez 19:33:11 04/29/03 We use 92mm pistons in our racecar. No Sleeves. - Escort Z 19:48:54 04/29/03 on 30+psi too,,,,,lol. (n/m) - ZBlacktt 20:06:44 04/29/03 3311cc what it adds up to. - Carlos Ramirez 20:19:53 04/29/03 "80% of the blocks tested could not withstand ----> - Kyle(Houston) 21:30:02 04/29/03 Consider the source, JWT also said that 480BHP is the max - MikeH(Twin GT35BB Incon Z) 22:14:10 04/29/03 Well consider the source then - SteamyZ(ZtoyZ.NET) 23:28:19 04/29/03 NOT BS - SteamyZ(ZtoyZ.NET) 23:31:30 04/29/03 I am not saying that there are not blocks that have ---> - Kyle(Houston) 08:47:29 04/30/03 I am basically quoting MS. You can call and ask bro (n/m) - Carlos Ramirez 06:32:09 04/30/03 I know it wasn't your qoute but it is still BS ;-).......... (n/m) - Kyle(Houston) 08:43:18 04/30/03 contrary to popular opinion, you can go very large on the Z - NR98 (Ohio) 20:59:47 04/29/03 On a good block - SteamyZ(ZtoyZ.NET) 23:32:15 04/29/03 Have it magnufluxed and find out (n/m) - SteamyZ(ZtoyZ.NET) 23:26:15 04/29/03
Post a Followup	You cannot reply to this message because you are not logged in.