Subject	I don't think the bracket would bend.....
Posted by	DavidM on April 16, 2003 at 1:09 PM
	This message has been viewed 71 times.
In Reply To	calling anyone who's ever hit a curb, you know who you are!! posted by ZEngineer on April 16, 2003 at 11:13 AM
Message	I think the tension rod is the weak link. My tension rod snapped at the bolts on the lower control arm when the control arm bent. The bracket itself is fine. So I'd put my money on your tension rod being bent. I opted to go with adjustable rods. Why replace with stock when you can upgrade :). This means you have to do both sides, though. If you just want to do the one side and stick stock, I'd call up courtesy and see how much they want for a new one before I got a used one. If you still seem to have issues after replacing the rod, then I'd do the bracket. David
Follow Ups	calling anyone who's ever hit a curb, you know who you are!! - ZEngineer 11:13:21 04/16/03 paging genic, please respond to thread 849932, paging genic (n/m) - Playboy 11:23:24 04/16/03 I knew this post would open up old wounds for some =) (n/m) - ZEngineer 11:25:18 04/16/03 Z1 will have plenty of those. (n/m) - YugoBernie (NoVA) 11:36:55 04/16/03 thanks Bernie, I'll email them asap (n/m) - ZEngineer 11:38:05 04/16/03 shoulda just emailed genic (n/m) - Spee 11:41:56 04/16/03 Painful details please :-) (n/m) - spicyZ 11:50:20 04/16/03 stock tension rod? if so, check the bushing - genic 11:51:39 04/16/03 I'll remove your driver's license the next time....lol - Oppaman Z 12:38:28 04/16/03 I have a brand new stock tension rod I'll sell you. Email me (n/m) - Woody75 (Denver) 13:02:14 04/16/03 throw in a short-shifter, and we're talking! =) - ZEngineer 13:37:46 04/16/03 As in sell you a shifter as well? No problem there. (n/m) - Woody75 (Denver) 14:38:52 04/16/03 of course "sell me", I'm not looking for freebeez here bro:) - ZEngineer 14:54:18 04/16/03 I had lots of customers in Canada. TTPete, Pure-Evil, etc. (n/m) - Woody75 (Denver) 18:08:48 04/16/03 I don't think the bracket would bend..... - DavidM 13:09:43 04/16/03 thanks for the tips =) (n/m) - ZEngineer 13:39:21 04/16/03 george when did u hit your car - _300zx_tt 13:21:40 04/16/03 last summer (n/m) - ZEngineer 13:40:04 04/16/03 on another note... - Altersys 13:37:12 04/16/03 I thought the bearings were fine. Alignment guy confirmed (n/m) - ZEngineer 13:40:52 04/16/03 All your curb are belong to us. :) (n/m) - Kez43 14:31:17 04/16/03 Mr. Engineer? Whats that on ther rear of your car?A spoiler? (n/m) - ZBlacktt 14:47:37 04/16/03 you mean this thing? =) - ZEngineer 14:58:50 04/16/03 Well, unique :) (n/m) - ZBlacktt 15:51:48 04/16/03 if you dont like it - ZEngineer 16:01:16 04/16/03 Looks small, and thin, but it's yours :) (n/m) - ZBlacktt 16:08:00 04/16/03 it's not the size of the spoiler that matters (n/m) - ZEngineer 16:13:04 04/16/03 ok "WORD" :-) (n/m) - TARGETZ 16:17:33 04/16/03 looks like the 99 spoiler, only not 1/3 of the rear view (n/m) - 3 double-0 ZX(Va Bch) 18:01:11 04/16/03 Oi. Here's my damage > - AshsZ (FabZEM All) 15:09:01 04/16/03 thanks, your website was VERY helpful - ZEngineer 15:18:20 04/16/03 I used the 1994 cobra rotors, angular vents, 28mm thick. - AshsZ (FabZEM All) 15:44:59 04/16/03 thanks Ash (n/m) - ZEngineer 15:50:16 04/16/03 I have a new pair that I will not be using - Chip(GinnMotorsports) 20:59:53 04/16/03 Are you discriminating against the ditch guys? ;) (n/m) - CantZme 15:12:03 04/16/03 there there...we all have our horror stories to tell =) (n/m) - ZEngineer 15:21:29 04/16/03
Post a Followup	You cannot reply to this message because you are not logged in.