RE: analysis, posted by niXit on March 18, 2003 at 01:45 PM
Message
In my carputer. Thermocouples are cheap at radioshack. Pressure sensors are a different story, they are about $140 a pop for one that is worth a damn. It would be cool to monitor the entire system as a whole while operating, pressure and temp before turbo, just after turbo, just after IC and in the plenum. Put AM injectors just after the turbo and also just before the TB's and spray one set at a time. Plot it all together on the same graph and that would be all you need. Run it at differing pressures and watch how things work for a 3dimensional analysis. The results from that test would be very conclusive for the equipment in that vehicle and likely could be carried over to produce good 'guesstimates' for other mods.
