Subject	Lookin good.
Posted by	AshsZ (FABio) on March 10, 2003 at 8:50 PM
	This message has been viewed 99 times.
In Reply To	Spongerider's dyno sheets>>> posted by KILLR300ZX on March 10, 2003 at 07:54 PM
Message	But I dont see the A/F or boost. I dont doubt these numbers shown on stock turbos, especially with the peak torque being so low, but without knowing the boost, those numbers are low. I'm more interested in knowin the boost was actually 11.5psi and pump fuel was used as stated. The reason I am asking for this data is because the configuration is not conducive of making 350RWHP at only 11.5psi of boost on an 8.5:1c.r. 3L engine. I made 388/406 with my own car while heatsoaked at 16psi. AFter 14runs (on this dyno posted above) the engine would have been up to good temp. Only problem is I dont think you guys got a pressure and A/F monitor with these charts. Congrats on the numbers, sincerely. They are good. The thing to keep in mind is that the product is not what makes the power, it just allows you to optimize to produce the most out of the hardparts in the system. That's why I'm specualtive only on the psi used to make this power. Is there other sheets for A/F and a boost chart? Anywho, congrats! I just hope next time more data is brought to the table so we have nothing to speculate or suspect. Maybe next time? :) [ ashleypowers.com ] [ agpowers@bellsouth.net ] [ Zemulator Information Sheet ] Enthusiasts soon understand each other. --W. Irving. Are you an enthusiast?
Follow Ups	Spongerider's dyno sheets>>> - KILLR300ZX 19:54:48 03/10/03 wow you couldn't resize that>? =\ (n/m) - Halo Z 20:14:10 03/10/03 wow, very smooth! And damn nice numbers for 11psi! (n/m) - Spee 20:16:03 03/10/03 It would be nice to see a psi graph though. - AshsZ (FABio) 21:05:17 03/10/03 Agreed. - Spee 21:16:45 03/10/03 If they dont have a PC interface, you'd be happier with ZEM. - AshsZ (FABio) 21:23:22 03/10/03 Yea! A voice of reason (n/m) - stumbleshoe 21:24:32 03/10/03 but the ability to have it onboard is better than needing - gtclk 01:57:10 03/11/03 Who says you can't carry a $200 ebay laptop with you? (n/m) - AshsZ (FABio) 07:41:25 03/11/03 Will the ZEmulator be able to duplicate these results? - Kenny (10 psi) 20:23:35 03/10/03 Im sure will come out with some new thing ;-). (n/m) - Sam(Houston) 20:32:09 03/10/03 The question is can YOU tune the same gain from the Zem? - Chip(GinnMotorsports) 20:51:18 03/10/03 Good point, there is a ton of time and carfeful tuning - Spee 21:09:47 03/10/03 Point blank: EXACTLY. - AshsZ (FABio) 21:14:42 03/10/03 As mentioned below... - Kenny (10 psi) 08:34:32 03/11/03 Yes, perhaps better, >>> - AshsZ (FABio) 21:10:35 03/10/03 what is blanked out there? - Marshall 20:23:43 03/10/03 Dean's personal information. - KILLR300ZX 21:17:34 03/10/03 oh ok (n/m) - Marshall 22:34:53 03/10/03 I was wondering the same thing. Looks suspicious... :) (n/m) - -Ever- 21:26:14 03/10/03 The pricetag. ;-) (n/m) - AshsZ (FABio) 21:35:50 03/10/03 Woa... that torque curve is unlike a Z - degradated 20:28:45 03/10/03 it will change - Marshall 20:36:17 03/10/03 Ah... gotcha - degradated 20:53:58 03/10/03 unlike a TT Z - Halo Z 20:49:37 03/10/03 Lookin good. - AshsZ (FABio) 20:50:43 03/10/03 Hey Dean... - SeedyROM 21:36:37 03/10/03 2nd (n/m) - Spee 21:47:33 03/10/03 Thanks Seedy. - AshsZ (FABio) 21:51:17 03/10/03 np. He has all that data, it's just that KILLR posted - SeedyROM 21:57:00 03/10/03 I will be patiently waiting to see all the parameters.. - AshsZ (FABio) 08:34:10 03/11/03 on 101 octane, correct? That makes a big diff. (n/m) - Kenny (10 psi) 12:30:02 03/11/03 NO, Spongerider claimed on 91 octane fuel they did that. (n/m) - AshsZ (FABio) 15:15:06 03/11/03 email - Mal1ce 22:13:42 03/10/03 There was a reason I posted it publically :) (n/m) - SeedyROM 01:13:27 03/11/03 Looks like JWT ECU is going down>>> - George(boostsolutionsinc.net) 21:50:46 03/10/03 Well, I dont feel like the dirty little bastard >>> - AshsZ (FABio) 21:55:46 03/10/03 1 slight differance.... - Halo Z 22:15:57 03/10/03 Thats a pretty big difference. And people are noticing. (n/m) - ZHOUND 23:03:59 03/10/03 The whole problem is that this here is pretty much>>> - George(boostsolutionsinc.net) 23:42:42 03/10/03 George, you dont know what you are talking about.. >> - AshsZ (FABio) 08:00:04 03/11/03 What I am saying is that you look at the whole thing in a - George(boostsolutionsinc.net) 19:37:49 03/11/03 I never said they were crap. I simply explained what - AshsZ (FABio) 07:44:27 03/11/03 Please tell me that PFC will work on the 96TT!!?? (n/m) - Otamann 23:12:40 03/10/03 Sorry! OBDII (n/m) - Seb 23:59:27 03/10/03 Aww man...thx alot Seb you just ruined my day...jk (n/m) - Otamann 02:42:03 03/11/03
Post a Followup	You cannot reply to this message because you are not logged in.