| Message |
Direct from Phuong - [ www.EatRiceZone.com: ]
"There are two options, Stillen's camber kit or 300 Degrees. The Stillen piece is a whole new unit that is adjustable and has urethane bushings. The 300 Degree uses your stock piece but changes camber by adding shims. Stillen $439, 300 Degree $85. Both do basically the same thing (more positive camber) but in a different fashion. You will get about 1 degree camber back. The kit works well if you have about -2.2 to -2.5 deg camber now. Fact. spec recommendation is -1.5 max."I've had the 300 degree kit installed at my friends shop. Took about 45 minutes to do. The kit comes with directions and was not difficult to install. The 300 degree kit, once installed, is not adjustable. So you get what you get. I would get it aligned just to see where your numbers are. But if its still not in spec, your pretty much done.
|
 |
