Subject	Here is the right way to do this:
Posted by	YugoBernie (NoVA) on February 25, 2003 at 2:27 PM
	This message has been viewed 121 times.
In Reply To	Re: There's not a whole lot to putting the 300 degree kit in posted by PerlZTT on February 25, 2003 at 02:23 PM
Message	First got to a shop and get a baseline reading. Then you will know if the 300deg kit will put you back into spec - it's pretty much a "fixed adjustment" for a 0.8 inch drop. If you more then that you should look into AArms. Either is a DIY install (IMHO) but the arms *should* be cheaper for a shop to install. Consider a alignment check/set a fixed cost on either process. Bernie Bilski berniebilski@comcast.net 1995 NISSAN 300ZX TwinTurbo 5 Speed in Cobalt Green 1989 YUGO GVL 5 Speed in Arctic White ZCCNV #390 ~ ECZA #368 "You know... now you're getting irritating ... - Greg (Dallas) 12:28:06 02/25/03"
Follow Ups	300 Degree Camber Kit question and Adj A Arm - PerlZTT 14:12:36 02/25/03 There's not a whole lot to putting the 300 degree kit in - boileralum00 14:16:32 02/25/03 Re: There's not a whole lot to putting the 300 degree kit in - PerlZTT 14:23:26 02/25/03 Here is the right way to do this: - YugoBernie (NoVA) 14:27:23 02/25/03 left is -2.8 and right is -3.0 (n/m) - PerlZTT 14:49:01 02/25/03 Read Bruce Z's post. - YugoBernie (NoVA) 15:28:01 02/25/03 not sure how old,came with the car when i got it. - PerlZTT 15:38:04 02/25/03 Are they black & operated by the flip switch? If so they - YugoBernie (NoVA) 16:02:22 02/25/03 they are black but dont operate by the flip switch. (n/m) - PerlZTT 16:10:14 02/25/03 Take some pictures if you can. - YugoBernie (NoVA) 16:38:09 02/25/03 Ok i will do that this weekend what can you see from the top (n/m) - PerlZTT 07:56:05 02/26/03 Re: 300 Degree Camber Kit question and Adj A Arm - Bruce z 14:31:22 02/25/03
Post a Followup	You cannot reply to this message because you are not logged in.