Subject	Do the TD05's and 2530's even have the same mounting >>>>
Posted by	Glenn (San Jose) on February 21, 2003 at 10:30 PM
	This message has been viewed 108 times.
In Reply To	so after reading posts for the past week, 2530/TD05 revisit posted by Scotts94z32 on February 21, 2003 at 06:32 PM
Message	flanges. The 2530 uses a T25 flange, but I am not sure of the TD05 flange. Also as I recall, the TD05 has external wastegates, whereas the 2530's have internal wastegates. I am not 100% sure, but figure that you can get the 2503's configured for external wastegates (+$$$), but then you will need custom downpipes (+$$$). The reason I ask is all this is I am going through the same manifold issues with my S13 Silvia, where the most popular flanges are either for T3/4 or T25 flanged turbos. To make matters worst, some are internal versus external wastegate. Not only is the mounting inlet mounting flange important, but the exhaust mounting flange is important as the different turbo families usually have their own unique flanges. For instance my S13 turbo is an HKS GT3037 that has a T25 flange, but uses an external wastegate and has it own unique 3037 exhaust flange. This beast requires a custom manifold. Glenn
Follow Ups	so after reading posts for the past week, 2530/TD05 revisit - Scotts94z32 18:32:33 02/21/03 td05 kit normally come WITH their manifold out of the box... - Jjzx 18:39:27 02/21/03 The HKS's flow less and therefore high flowing - VECTOR 18:50:57 02/21/03 They are not too expensive to rebuild - Chip(GinnMotorsports) 20:23:15 02/21/03 You don't reroute the wastegates bact 2 the exhaust - Good2Zya 21:04:25 02/21/03 I know that but it sounds like a broken exhaust - VECTOR 10:46:37 02/22/03 Should only hear it when they open (n/m) - Good2Zya 21:43:32 02/22/03 See Scott, I like the td05 too, but i don't think it is>> - Zster (QuickZilver) 19:04:56 02/21/03 Hey, Salah. Very good points. Your concerns are basically - Scotts94z32 20:46:05 02/21/03 My car wont be ready for a while, I can't see me>> - Zster (QuickZilver) 20:53:15 02/21/03 Funny that SP now recommends 2530's. When I talked to - Glenn (San Jose) 22:35:25 02/21/03 SP??? - VECTOR 11:35:06 02/22/03 Scott Performance in Santa Clara, CA.. (n/m) - Scotts94z32 17:10:20 02/22/03 Sorry, off topic: Your car is very sharp.....love it... - RSR 15:48:36 02/22/03 Yeah. They are using an 86 housing instead. Now installing - Scotts94z32 17:11:45 02/22/03 Are you planning on getting a kit soon Salah? (n/m) - -Ever- 21:14:15 02/21/03 Considering some options ;) We'll see. (n/m) - Zster (QuickZilver) 00:45:32 02/22/03 SPL parts TDO5 is not a kit - Chip(GinnMotorsports) 20:21:49 02/21/03 Understood, Chip. Thanks. I was just calling it "kit" for - Scotts94z32 20:43:32 02/21/03 Do the TD05's and 2530's even have the same mounting >>>> - Glenn (San Jose) 22:30:16 02/21/03 Pentroof manifolds are all custom built to order > - kuah@splparts.com 22:54:20 02/21/03 The Pentroof TD05 "kit" is not a Greddy kit plus manifolds > - kuah@splparts.com 22:51:06 02/21/03 Sounds good, kuah, we'll keep in touch as my thoughs (and my - Scotts94z32 17:14:31 02/22/03
Post a Followup	You cannot reply to this message because you are not logged in.