Subject	Try stock manifolds + stock engine
Posted by	Chip(GinnMotorsports) on February 12, 2003 at 2:46 PM
	This message has been viewed 86 times.
In Reply To	Aren't the 1820's supposed to flow for up to 800 bhp posted by U ZCREAM (TTZ in '03) on February 12, 2003 at 01:09 PM
Message	and this is good. The 1820 are over 65% efficient to right at 28-30 psi. At 500+ it comes down to airflow. The stock manifolds absolutely suck. I will be surprised if ANY turbo can put down 600 rwhp with stock manifolds.
Follow Ups	Does anybody have upgraded turbo dyno charts run at - Chip(GinnMotorsports) 12:59:32 02/12/03 damn... thats a lot of power at 16 man. - down5hift 13:05:33 02/12/03 I did 516 rwhp at 16psi with my setup. You ain't seen - MikeH(Twin GT35BB Incon Z) 13:10:56 02/12/03 when is your beast gonna be ready to go? (n/m) - Spee 14:44:56 02/12/03 waiting my facia is being painted next week. Soon (n/m) - MikeH(Twin GT35BB Incon Z) 17:06:23 02/12/03 The 1820 is VERY close to your turbos in size - Chip(GinnMotorsports) 17:32:05 02/12/03 Yes, playing field of TD06/20g's, HKS 2835's - ZBlacktt 13:57:04 02/12/03 My car made 450rwhp at 15-16psi with 16Gs. (n/m) - ZHOUND 13:07:59 02/12/03 Aren't the 1820's supposed to flow for up to 800 bhp - U ZCREAM (TTZ in '03) 13:09:02 02/12/03 Seeing that there Max psi is 27,on 11 more than that dyno :( - ZBlacktt 13:38:23 02/12/03 Try stock manifolds + stock engine - Chip(GinnMotorsports) 14:46:50 02/12/03 Bah, I'll beat em all with stock turbos. - AshsZ (FABio) 13:09:39 02/12/03 My baseline dyno run was 50x I believe - TwinTurboPete 13:16:44 02/12/03 Who would run cats with upgraded turbos? Of couse it - MikeH(Twin GT35BB Incon Z) 13:19:54 02/12/03 Kyle(SGP) had posted an HKS twin car with cats. - ZHOUND 13:23:05 02/12/03 you can get high flow cats... - niXit 13:32:05 02/12/03 Here's my chart at 1.2 kg/cm2 >> - Mike (Austin) 13:58:25 02/12/03 thats pretty. (n/m) - niXit 14:40:07 02/12/03 4300-6000 is very nice. Hope ya shift so that you hit that. (n/m) - xybertron 17:40:00 02/12/03 Forgot to add 100% stock longblock, Zo seems to be the only - Chip(GinnMotorsports) 14:42:54 02/12/03 Re: Forgot to add 100% stock longblock, Zo seems to be the o - ZHOUND 15:44:23 02/12/03 I agree, I consider your engine stock. (n/m) - Chip(GinnMotorsports) 16:10:18 02/12/03 I do have another chart back when it was the stock >> - Mike (Austin) 19:36:08 02/12/03 If you could scan it that would be great, I think - Chip(GinnMotorsports) 20:07:39 02/12/03 I'll shoot myself a reminder and send it to you this weekend - Mike (Austin) 11:30:56 02/13/03 here's mine at 1.25 bar....clutch slipped :( - RUN-4-COVER 15:01:17 02/12/03 are the 1820's comparable to the 2530's? i thought TD05's - Bernie 16:18:50 02/12/03 1820 is bigger than TDO5, the only TDO5 dyno that I could - Chip(GinnMotorsports) 17:30:59 02/12/03 i c. just wondering because u said in the original post you - Bernie 18:32:54 02/12/03 You were all that I had to work with at first. - Chip(GinnMotorsports) 20:12:59 02/12/03 Aussie BBGT25's, 18psi, pump gas = 438RWHP - aspendog 16:20:57 02/12/03 Torque? (n/m) - Chip(GinnMotorsports) 17:28:04 02/12/03 17PSI on my old set of turbos 450RWHP and 445lbs/TQ - Carlos Ramirez 18:34:24 02/12/03 What trim wheel? - Chip(GinnMotorsports) 20:12:01 02/12/03 I will have to check I forget now.. (n/m) - Carlos Ramirez 21:00:26 02/12/03
Post a Followup	You cannot reply to this message because you are not logged in.