| Message |
- Your best bet is to look for Mustang drag wheels, which are the same bolt pattern ---> 5X114.3mm = 5X4.5"
- I've run three different sets of Mickeys in three different sizes without tubes with no problems
- I personally do not think that you have to have a heavy wheel, but he may know something that I don't
- You can easily run a 15X8 with that tire size; 15X9 isn't nearly as common as an 8 or 10 inch wheel
- If you ask me, there is no comparison between an ET Street and a drag radial in terms of traction; nor is there a comparison in terms of driveabilityFor 15X8, at jegs.com, try the part numbers below....there are also plenty of 15X10's, but you'll have to find them yourself on the website, which is easy. Weld Pro-star
927-96-58208
927-96-58210 Weld Draglite
927-90-58348
927-90-58350 Centerline Telstar
184-135806545 If you have to have heavy, this might work, although the backspacing is iffy.......
Cragar 342
260-342-5812 Enjoy,
RSR
|
 |
