Subject	I've been looking into this as well, and I found a new part
Posted by	boileralum00 on January 27, 2003 at 3:49 PM
	This message has been viewed 52 times.
In Reply To	What exactly do I need for braided fuel lines (length, conne posted by Iced Z on January 27, 2003 at 09:53 AM
Message	today that will help do the job. The Summit P/N is EAR-360165. It is a -6AN line to 5/16 tube adapter. BAsically, you will need one of these for each clamp, and probably 6ft (to be safe) of -6AN braided line. I did a quick diagram without being able to look at it, and I think you will need 10 of the adapters. So you should be out the door for < $100 after shipping. BTW, that includes the 3" line between the fuel rails under the upper plenum. Rule #1 - There's always a bastard!
Follow Ups	What exactly do I need for braided fuel lines (length, conne - Iced Z 09:53:45 01/27/03 are you really going to pull the plenum for that? goodness! (n/m) - niXit(StLouis) 10:09:49 01/27/03 I tired of breaking out the screw driver every cold morning - Iced Z 10:15:02 01/27/03 sounds like a lot of labor. - niXit(StLouis) 10:17:34 01/27/03 Why not just by-pass the stock fuel rail - Atti2de 10:27:26 01/27/03 you have to get to the short 3" hose up front. - niXit(StLouis) 10:31:20 01/27/03 Oops, did not know that was the hose he was asking - Atti2de 10:34:29 01/27/03 The short hose seems most prone to leaking. (n/m) - niXit(StLouis) 10:55:35 01/27/03 you can not use generic high pressure line - down5hift 14:49:49 01/27/03 yes, I am very aware. - niXit 15:27:31 01/27/03 fuel injector hose from Salvo works fine for me. (n/m) - sbsTT(MD) 18:32:48 01/27/03 Loctite or double nut - goixiz 10:18:49 01/27/03 Yea, I don't smell anything after I tighten them also w/ loc - Iced Z 10:20:48 01/27/03 the clamps get worn, old, and brittle. - niXit(StLouis) 10:30:01 01/27/03 new clamps. Nissan OEM ones suck. (n/m) - sbsTT(MD) 18:29:58 01/27/03 How does every1 else do it. Seedy has em, Pats300zx has the - Iced Z 10:30:16 01/27/03 Unless you have AN fittings, braided lines won't do much. (n/m) - MikeH(Twin GT35BB Incon Z) 11:14:44 01/27/03 I've been looking into this as well, and I found a new part - boileralum00 15:49:57 01/27/03 hmmm...wonder if that is a new one that summit carries. - sbsTT(MD) 18:44:41 01/27/03 I hadn't seen it before today either, Spee. I actually saw - boileralum00 20:11:36 01/27/03
Post a Followup	You cannot reply to this message because you are not logged in.