| 1. The water line hoses we normally remove them with a vice grip, then tap the pipes, and then install some allen plugs. 2. The E-Manage still wants to use the MAF so you will have to get that back on. 3. if you move your fuel pressure regulator a back a bit you can fit a small liquid filled gauge to set your fuel pressure. Remember to set it off vacuum to 43 PSI. 4. Use a torque wrench on the cam gears I forget the spec now. But those HKS Gears have a tendancy to slip just be aware of it. 5. I would just use a filter on valve cover or a catch can instead of sending it back to the air intake. 6. Do not install the MAP sensor directly onto the air intake the vibration of the motor will cause you problems. It took you three days to install that motor? :-) Good luck with e-manage I could help you with it but I got a condition you can e-mail me about it.

|