Subject	sure it matters...
Posted by	Marshall on December 13, 2002 at 2:26 PM
	This message has been viewed 40 times.
In Reply To	I would guess they flex much less than stock since the're posted by Mal1ce on December 13, 2002 at 10:53 AM
Message	:The motor mounts really have no bearing on what size turbos you can run. That's determined by other upgrades that you have or have not made...like bigger injectors, bigger IC's, etc etc etc The motor mounts have a lot to do with what size turbos you can run. The space is tight as it is, and there must be space left between the turbos and the frame rails to prevent them from colliding when the engine torques to the side when you hit the gas. You may be able to fit slightly larger turbos with the stock engine mounts, but go any bigger and they're going to hit the frame rails when you hit the gas. That's why they sell solid motor mounts, they eliminate the flex and enable you to put larger turbos in without fear of them smashing into the rails. If they clear when the engine's off, they'll clear when you floor it.
Follow Ups	Recent snap shots..Now, if Chris at Performance Motorsports - B-Ster 22:56:29 12/12/02 looking good but need a step back shot of fascia to judge (n/m) - Red ZX (SoCal) 22:58:00 12/12/02 My apologies. Would have had to move some equipment. (n/m) - B-Ster 23:01:13 12/12/02 Stock modified fascia = badass. - sbsTT(MD) 22:59:42 12/12/02 Thank you bro....It turned out better than anticipated. (n/m) - B-Ster 23:02:03 12/12/02 It does look very clean and functional (n/m) - Janders 23:15:34 12/12/02 I feel the same way :-). (n/m) - ZHOUND 11:38:26 12/13/02 Looking sweet, good job (n/m) - Zeus 23:01:49 12/12/02 I love yellow :) (n/m) - ImTheDevil 23:07:27 12/12/02 Especially the rain/snow/exposed-to-the-elements yellow :) (n/m) - JRH(KY) 09:37:23 12/13/02 Get that beast running already! Looks great! (n/m) - John(Houston) 23:18:40 12/12/02 I finished my fuel system today, I did not modify the intake - Chip(GinnMotorsports) 23:30:22 12/12/02 whats happen to the brake kit GB man? (n/m) - Z. 00:20:28 12/13/02 Congratulations on the beautiful machine. (n/m) - ThermalDynamix 01:05:08 12/13/02 Chip: Please share a snap shot of that! (n/m) - B-Ster 01:10:02 12/13/02 that is lookin beauTful bro-love the facia, fmic, and enviou - Wagz 23:33:36 12/12/02 When you crank it, please give feedback on idle quality. (n/m) - B-Ster 01:12:09 12/13/02 will do-i'm pretty nervous actually> - Wagz 01:15:17 12/13/02 lol nice pentroof oil cap too-havent seen that 1 b4 - Wagz 23:45:16 12/12/02 you are so owned.. - Carlos Ramirez 08:04:35 12/13/02 u bastard-where to get the oil cap or a better pic of it? (n/m) - Wagz 10:54:50 12/13/02 Your car is absolutely BEAUTIFUL!!! :-) (n/m) - George(boostsolutionsinc.net) 23:47:28 12/12/02 I always say keep it looking as stock as possible (n/m) - scottwerks 02:47:03 12/13/02 Never thought I'd say it, but I love my stock looking TT - SeedyROM 02:53:30 12/13/02 as much as like you said you'd never buy a TT? - BooZTT (Hawaii) 04:44:58 12/13/02 Oh I always said I'd get one...no one believed me tho :P (n/m) - SeedyROM 10:37:50 12/13/02 Haha..hope you're doing well bro..drop me a line. (n/m) - BooZTT (Hawaii) 07:50:07 12/14/02 I am more eager than you to start up that beast - TwinTurboPete 03:49:36 12/13/02 Looks good.. - Carlos Ramirez 06:07:57 12/13/02 very very nice....can't wait to see some results (n/m) - NissanRacing98 (OH) 08:47:18 12/13/02 Was the Stock front to keep the car Sleeper looking? - ZBlacktt 08:50:51 12/13/02 The stock front is my PERSONAL favorite. - B-Ster 09:11:45 12/13/02 You and I are together on this one. - Chip(GinnMotorsports) 17:39:19 12/13/02 where did you get the urethane motor mounts? - TARGETZ 10:01:53 12/13/02 $195 AU each, link >> - Mal1ce 10:46:42 12/13/02 You will have to buy me dinner and drinks first... - TARGETZ 14:26:12 12/13/02 how much do the urethane motor mounts flex? - Marshall 10:29:45 12/13/02 I would guess they flex much less than stock since the're - Mal1ce 10:53:30 12/13/02 sure it matters... - Marshall 14:26:27 12/13/02 Ya...well, I guess there is that. __________:) (n/m) - Mal1ce 14:33:42 12/13/02 wow that is a sweet piece of machinery. (n/m) - josh 16:45:32 12/13/02
Post a Followup	You cannot reply to this message because you are not logged in.