|
Actually the passenger side I got off with a bit of streching but I couldnt even SEE the driver side one. I tried with the flex socket and extension but I was just getting nowhere. : Good write up. I hope you kept track of all those hoses, connectors that you cut/removed while lifting the tranny. I cut all the hoses at all sorts of different angles so I'd know which ones go where. :) : I'd change the valve cover gaskets too if I were you. Same thing with all sensors that aren't usually accessible easy (I think there's one under the plenum, right? Yup, I'll be doing this as well. : Why did you remove the plenum to remove the turbos? Is it required? Injectors, baby! : Gonna install downpipes? I would. If some are available from DSP I will. : Good luck! YOu may want to port/extrude hone the exhaust manifolds too while you're at it. Gonna do that too!
John Yim (Houston)
91 ZTT Stage III+
30 BSP, Houston Region SCCA
"...Just as they're about to catch me... Twin... Turbos... Kick... In..."
 Click to subscribe to the Houston Z32 Mailing list
|
