myself. Look in search in General under elizium. Very easy to make your own lines. Buy lines longer then you need for each nozzle. The hard part is cutting the line the right lenght. to long and the lines will bend to high and look bad too short and I think you can figure that out. Then buy 4 AN fittings that thread on to the fogger nozzle. Then pull back the outer sleeve. Slide the bottom nut and then the compression fitting onto the exposed hose. Now slide the threaded nut onto the hose and be careful to hold the line and the bottom nut tight , as you tighten the top nut onto the bottom nut the line likes to slide back and out of the bottom nut Its easier then it sounds, the guy at the auto store showed me how to do it. Any question let me know, Rob TT