Subject	>>>>
Posted by	Greg (Dallas) on August 15, 2002 at 10:09 PM
	This message has been viewed 111 times.
In Reply To	350rwhp possible by doing these? posted by NotoriousBboy99 on August 15, 2002 at 10:04 PM
Message	intake = good cat-back exhaust = good hi-flow cats = good (although I haven't seen dyno evidence between them and test pipes to know if there's a diff) pipe from cats to turbos = downpipes = good clutch = doesn't matter flywheel = doesn't matter (well, hp gain not noticeable) You mention 555cc injectors but ask how much more you would get with a 'chip'. I'm sure you realize you NEED a chip t run 555cc injectors in the first place. With that combo and running 15 - 17psi you might hit 350rwhp... it all depends. Z's vary widely so I'd say you'd land somewhere between 325 & 340... if you hit 350, be very happy. You didn't mention underdrive pulley. That's almost guaranteed 12-14rwhp gain. Meddle not in the affairs of dragons, for you are crunchy, and good with mustard.
Follow Ups	350rwhp possible by doing these? - NotoriousBboy99 22:04:03 08/15/02 stockards @ 15psi? 350 will be pushing it - genic 22:05:32 08/15/02 so i guess a boost gauge would greatly help? (n/m) - NotoriousBboy99 22:06:49 08/15/02 well, it won't magically increase your boost but >> - Greg (Dallas) 22:10:31 08/15/02 sorry i meant boost controller (n/m) - NotoriousBboy99 07:21:54 08/16/02 lol... I would hope you would have a boost guage (n/m) - David 94TT 22:29:57 08/15/02 >>>> - Greg (Dallas) 22:09:22 08/15/02 UP maybe good but it's also controvertial (sp) no? - chivas 01:14:03 08/16/02 yeah but I don't have Frankenhose and the "IIB" theory - sbsTT(MD) 01:21:31 08/16/02 the buckle on my belt will knock you the F out! :-P (n/m) - chivas 02:09:58 08/16/02 Re: 350rwhp possible by doing these? - David 94TT 22:29:12 08/15/02 Wow! That's high. (n/m) - Greg (Dallas) 22:32:46 08/15/02 Looks good to me----> - ImTheDevil 22:37:40 08/15/02 RWTQ was at 429.1. I have the chart too (n/m) - David 94TT 22:44:38 08/15/02 About the same that I got - stupidfast 07:22:24 08/16/02 damn! was it like 35 degrees outside? - sbsTT(MD) 22:38:58 08/15/02 Like 60 I would say (n/m) - David 94TT 22:42:26 08/15/02 and 25 deg of timing on race gas - LOL (n/m) - YellowZXTT 23:06:46 08/15/02 15-16 degrees timing, Pump gas... (just to clarify) (n/m) - David 94TT 02:57:14 08/16/02 here is what you need for 350rwhp - deftones 22:33:06 08/15/02 Man, that could be 315 or 360 -----> - David 94TT 22:50:01 08/15/02 So you have seen a z with those mods and only - deftones 00:49:54 08/16/02 Re: So you have seen a z with those mods and only - David 94TT 02:56:36 08/16/02 w/ 555's go 18psi but no more. you'll get 360 rwhp - Pure-Evil 23:17:38 08/15/02 he didn't mention IC and you suggest 18psi? (n/m) - Jjzx 23:43:47 08/15/02 yup.i have run 18psi on stock injectors.no probs. - Pure-Evil 00:18:04 08/16/02 you also live in canada.........wait so does he =) (n/m) - Xi0nX4 (ohio) 00:27:25 08/16/02 every z is different, it really varies at this stage>> - Xi0nX4 (ohio) 00:20:34 08/16/02 amen (n/m) - David 94TT 02:59:32 08/16/02 You will NOT be hitting 350 whp without turning up the boost - degradated 00:21:02 08/16/02 Dyno: RWHP 369.8---- Torque 424.9 @ 17.40 psi - ZBlacktt 01:09:38 08/16/02 SAE corrected? :P (n/m) - timz 06:11:24 08/16/02 Yes RWHP 392.7---- Torque 451.7 was messured (n/m) - ZBlacktt 07:51:05 08/16/02 Distilled water? - RezidentEvil 10:30:19 08/16/02
Post a Followup	You cannot reply to this message because you are not logged in.