Subject	well...i went to the track in may...
Posted by	nixit(da][as) on August 14, 2002 at 1:32 PM
	This message has been viewed 54 times.
In Reply To	do you really adjust them that often? posted by sbsTT(MD) on August 14, 2002 at 01:27 PM
Message	: I guess you might use different settings for autocross and road courses. But for normal everyday driving I guess it would be set and left? I'm running -2 degrees on both sides up front now since I put the Eibachs on. I have a camber correction kit that I have not installed yet. I might just wait for these. i marked the settings of the links before adding shitloads of camber. got off the track, set em back. but I over did it. the outsides where wearing more then anywhere else (very mild, but needing action). so I jacked the car up, and adjusted them just a hair. took all of 5 minutes....no...3 minutes. took me longer to clean my hands afterwords.
Follow Ups	Teaser pics of adj. front a-arms - rodelb 12:37:40 08/14/02 are the allthread bars mild steel or heat treated? (n/m) - my91z 12:39:11 08/14/02 Re: mild steel (n/m) - rodelb 14:31:06 08/14/02 Sweet... can't wait for the final product, I need it! =) (n/m) - KaZ (jTTfz) NoVa 12:51:14 08/14/02 looks good so far.. - fourZero 12:52:29 08/14/02 as simple as they are they should not be "competetive"> - my91z 12:54:09 08/14/02 I agree. That's basically what I was trying to say. (n/m) - fourZero 12:57:30 08/14/02 Every single piece on that a-arm had to be CNC machined - kZtt (zedparts.com) 13:10:07 08/14/02 I don't want to start an argument but I don't see >> - SlicktopTT 13:24:26 08/14/02 Re: answers inside...(long) - rodelb 13:37:56 08/14/02 Thanks, I think what my self and others think is >> - SlicktopTT 13:47:55 08/14/02 "It takes a lot of time and effort" - fourZero 14:13:59 08/14/02 seems like CNCing is overkill on them>>> - my91z 14:52:18 08/14/02 Re: seems like CNCing is overkill on them>>> - kZtt (zedparts.com) 15:57:42 08/14/02 does that design allow them to be adjusted on the car? - sbsTT(MD) 13:05:09 08/14/02 I'm no engineer ... but - Guapo 13:08:08 08/14/02 well if one end is reverse threaded.... - MyWhiteZTT(NJ) 13:09:12 08/14/02 ah I see now...just like my sdjustabel tension rods. - sbsTT(MD) 13:25:29 08/14/02 I just readjusted my Midoris this morning... - nixit(da][as) 13:11:49 08/14/02 do you really adjust them that often? - sbsTT(MD) 13:27:47 08/14/02 well...i went to the track in may... - nixit(da][as) 13:32:06 08/14/02 Nah... all you have to do is twist the middle thing - cmb6s 13:11:58 08/14/02 Its like a rear STB, has reverse threads on one side so >>> - KaZ (jTTfz) NoVa 13:18:42 08/14/02 yes.... - rodelb 13:27:36 08/14/02 cool, I will definately be interested in a set. - sbsTT(MD) 13:29:41 08/14/02 I might be interested in the front and rear! - cainmt 14:05:58 08/14/02 how do they lock in position? (n/m) - Bernie 14:15:56 08/14/02 That's what I'd like to know too... lol (n/m) - SpdDemon13 (Baltimore) 14:24:07 08/14/02 Any idea on the camber range this will allow? - DavidM 14:16:09 08/14/02 shitloads of negative and positive. (n/m) - nixit(da][as) 14:47:50 08/14/02 It won't go more negative, you are correct, that is why > - kZtt (zedparts.com) 16:03:27 08/14/02 imho you should knock 1/8-1/4" off anyway. - nixit(da][as) 16:21:40 08/14/02 I have a very interesting question here... - SpdDemon13 (Baltimore) 14:19:41 08/14/02 Re: I mentioned that we are waiting on jam nuts... - rodelb 14:30:09 08/14/02 I have a very interesting question here... - SpdDemon13 (Baltimore) 14:23:03 08/14/02 They arent in the pics but Rodel says there will be lock nut - John(Houston) 14:27:54 08/14/02 they resemble the midoris, i like me ;) (n/m) - ForceFedTT 18:05:38 08/14/02
Post a Followup	You cannot reply to this message because you are not logged in.