Subject	Do all round canister mufflers sound the same..
Posted by	MikeH(Twin GT35BB Incon Z) on July 15, 2002 at 10:51 PM
	This message has been viewed 71 times.
Message	If you have the same diameter and length muffler. How else can they be different to sound different? There is not much to a straight through muffler other than the canister around . Arizona'a most powerful 600HP 15 second Z More powerful than a stock TT , slower than an NA Dynoed 515 rwhp and 420 ft.lbs @ 16psi 89 degrees. 533 rwhp and 450 ft. lbs @19 psi and slipping clutch and heat soaked motor , 85 degrees.
Follow Ups	Do all round canister mufflers sound the same.. - MikeH(Twin GT35BB Incon Z) 22:51:19 07/15/02 NO, they definently differ. some greatly. - nixit(da][as) 22:56:21 07/15/02 What baffles are you talking about? It is a straight - MikeH(Twin GT35BB Incon Z) 23:00:02 07/15/02 a little research... - nixit(da][as) 23:48:32 07/15/02 PE is straight thru AFAIK, just a perforated tube surrounded - my91z 06:11:52 07/16/02 It may be "straight-thru" but, you have to remember >>> - KaZ (jTTfz) NoVa 06:50:17 07/16/02 there is no "open area", it is straight thru. The exhaust> - my91z 07:35:11 07/16/02 this is what your incorrect thought process is on GReddy's>> - my91z 08:00:27 07/16/02 you proved my point, thank you. - nixit(da][as) 11:09:35 07/16/02 sorta. The sound waves penetrate the media much moreso> - my91z 11:12:33 07/16/02 "chamber" brings forth conotations of an empty space>>> - my91z 11:16:22 07/16/02 Nick, no baffles, chambers or anything in a GReddy product> - my91z 08:04:19 07/16/02 There are baffles...they are just on the sides... (n/m) - 2 Zweet 09:05:11 07/16/02 afraid not. Unless you have some odd definition of "baffle" - my91z 09:16:17 07/16/02 "show me the baffles!!..."(like the movie line...) - my91z 09:21:16 07/16/02 muffler design is very similar to audio box building> - my91z 08:08:32 07/16/02 material packed into the muffler can effect the sound - 96-2+2TT(Power Supply Racing) 22:57:19 07/15/02
Post a Followup	You cannot reply to this message because you are not logged in.