Subject	The 11.6" Skyline rotor is from the R32 GT-R >
Posted by	kZtt (zedparts.com) on April 22, 2002 at 7:32 PM
	This message has been viewed 368 times.
In Reply To	Ok, I did search too...I find 12.7 inches ?! posted by Technomancer on April 22, 2002 at 05:14 PM
Message	Here's the info for you: Z32 280mm X 30mm R32 GT-R 296mm X 32mm R33/R34 GT-R 324mm X 30mm The "Skyline" brake kit sold here in the USA is the R32 GT-R brakes. The R32 GT-R had 16" wheels just like the Z32, which is why their brakes will fit behind the stock Z32 wheels. The R33 and R34 GT-R used 17" and larger wheels, so they could use larger diameter rotors. As a side note, the R33 and R34 GT-Rs used 4 pot Brembo calipers, while the R32 GT-R and the Z32 both used Nissan (OEM) calipers. As for the VR4 rotors... I am not the source of any of that info... however, I believe Chip's info is the correct one :)
Follow Ups	Pics from the R33-GTR brake upgrade>>> - FCV94TTZ 15:39:08 04/22/02 Nice... Looks like I'll have to do the same. (n/m) - Pace300zx 15:51:04 04/22/02 Couple of small problems! And pics of the brackets!!! - FCV94TTZ 16:01:36 04/22/02 Who made your brackets? (n/m) - Spongerider 16:20:08 04/22/02 Or are they off the R33? (n/m) - Spongerider 16:21:26 04/22/02 I believe the kit is made by Project Mu? kZtt? (n/m) - FCV94TTZ 16:28:22 04/22/02 Yep, Project Mu. - Altersys 16:29:31 04/22/02 Thanks guys. (n/m) - Spongerider 16:31:54 04/22/02 Yup, bracket/caliper adapter kit is made by Project Mu > - kZtt (zedparts.com) 16:29:54 04/22/02 Any clue what the diameter of those are? They look huge! (n/m) - LordZ 16:03:13 04/22/02 They are 324mm, or about 12.8" :) (n/m) - kZtt (zedparts.com) 16:10:30 04/22/02 Hmm...I thought the VR4 rotors were 12.8", the R33 were 13.1 - Technomancer 16:41:33 04/22/02 According to search, Chip said the VR4 rotors are 315mm - kZtt (zedparts.com) 16:56:15 04/22/02 Yep. (n/m) - Chip(GinnMotorsports) 17:06:25 04/22/02 Ok, I did search too...I find 12.7 inches ?! - Technomancer 17:14:06 04/22/02 dude, why're you question both sellers??? lmao, just drop it - Jjzx (pic masta/MECP) 17:42:12 04/22/02 I question because the info is inconsistent - Technomancer 17:48:50 04/22/02 both greg (adaptor guy) and chip advertise from 12.4-12.5 - Jjzx (pic masta/MECP) 17:58:00 04/22/02 OK fine. Meanwhile, I found the source of my 12.8 number>>> - Technomancer 18:17:07 04/22/02 juicy~ - Jjzx (pic masta/MECP) 18:37:09 04/22/02 LOL, the bill in the center is not enough...great pic! (n/m) - Technomancer 18:45:24 04/22/02 The 11.6" Skyline rotor is from the R32 GT-R > - kZtt (zedparts.com) 19:32:26 04/22/02 Thanks. I think I've seen the light. - Technomancer 20:00:17 04/22/02 Yeah... wish I did :( - kZtt (zedparts.com) 20:55:37 04/22/02 hmmm 9mm sure looks bigger to me. :) - LordZ 17:33:08 04/22/02 Hey Frank, looking good... - Austin TTZ 16:04:31 04/22/02 ADR's are treating me great>>>>>>>>>>> - FCV94TTZ 16:17:31 04/22/02 Damn. I knew I waited too long to buy the adapters... - Altersys 16:18:12 04/22/02 Looks really good---let me know if you ever want--> - z-extreme 16:24:06 04/22/02 Yes, these are AustinTTZ's old wheels - FCV94TTZ 16:32:49 04/22/02 Wheel full of brake disk=good! (n/m) - John Y(Houston) 16:35:24 04/22/02 Couple of questions tho... - John Y(Houston) 16:44:55 04/22/02 Answers>>>>>>>> - FCV94TTZ 16:50:13 04/22/02 Forgot to mention we laid the smackdown on his Candy ASS! (n/m) - FCV94TTZ 16:53:25 04/22/02 ROFL. Hehehehh :) (n/m) - John Y(Houston) 16:57:19 04/22/02 um... I'll let CarlCuro answer #2... ;) (n/m) - kZtt (zedparts.com) 17:04:53 04/22/02 You forgot the good old money shot! :) - Christopher 23:10:47 04/22/02 Hell, I would've ate it for money. :) (n/m) - John Y(Houston) 00:11:59 04/23/02 :( Wish I didn't have to buy 17" wheels to put those in... - degradated 17:20:00 04/22/02 hehe, those are huge will they fit wittle 17's? (n/m) - LordZ 17:34:46 04/22/02 should fit fine... (n/m) - Altersys 20:36:27 04/22/02 looks damn good-but u know i'm an ADR fan! (n/m) - Wagz(once a playa...) 22:46:16 04/22/02
Post a Followup	You cannot reply to this message because you are not logged in.