Subject	Did I get the right offset and bolt pattern?>>>>
Posted by	ALL MOTORZ on March 06, 2002 at 4:20 PM
	This message has been viewed 147 times.
Message	I just bought some Blitz Technospeed Z1 rims the fronts are 18X8 with a bolt pattern of 114.3mm and the offset is +41H, +45 the rears are 18X10 with the same bolt pattern as the front, and the offset is +38 I wanted the fronts to be 18X8.5, but the guy said that the bolt pattern on them is 140mm which wouldn't work. So did I get it right..Thanks!!! Oh and what size tire should I use!! LaterZ
Follow Ups	Did I get the right offset and bolt pattern?>>>> - ALL MOTORZ 16:20:59 03/06/02 You should ask this BEFORE you buy not after - MugenRacer 16:31:12 03/06/02 I could be wrong. (n/m) - MugenRacer 16:40:23 03/06/02 they should fit fine, find out before buying next time ;] (n/m) - flawlezZ 16:36:48 03/06/02 Which 18x8, +41H or +45? Those are 2 different wheels. (n/m) - Chip(GinnMotorsports) 17:44:21 03/06/02 I think it means 41H through 45 will fit..Im not sure though (n/m) - ALL MOTORZ 18:44:35 03/06/02 Nope, completely different one ih high disk,the other is not - Chip(GinnMotorsports) 19:26:58 03/06/02 18x8 with +45 will not fit. must use +41 HD=high Disk (n/m) - Carlos Ramirez 18:50:16 03/06/02 I called and they said that it was recommended by Blitz! (n/m) - ALL MOTORZ 23:33:11 03/06/02
Post a Followup	You cannot reply to this message because you are not logged in.