Subject	Is the JWT clutch multi-plated? >>>
Posted by	KaZ on September 25, 2000 at 8:40 PM
	This message has been viewed 18 times.
In Reply To	Clutch chatter after JWT/Jun Flywheel Upgrade posted by rzncain on September 25, 2000 at 08:30 PM
Message	My clutch is dual plated and it chatters when the clutch is disengaged from the flywheel. Car also studders when I start off in first or reverse, though reserve is a little better. Car does one of three things when I start off in first... Stalls, Studders, or engages smoothly (requires lots o' gas and feathering/slipping the clutch). Just seems normal to me now. later, KaZ
Follow Ups	Clutch chatter after JWT/Jun Flywheel Upgrade - rzncain 20:30:15 09/25/00 Is the JWT clutch multi-plated? >>> - KaZ 20:40:20 09/25/00 Std. organic disc (n/m) - rzncain 20:46:48 09/25/00 I have the JWT Clutch/Flywheel package, no problems at all.. - ChrisSE 20:49:38 09/25/00 That's what I'm hearing...any ideas on fix? (n/m) - rzncain 20:51:28 09/25/00 Maybe, Improper Installation? (n/m) - ChrisSE 20:55:37 09/25/00 Hope it was aligned properly (n/m) - unlimitedZ [Patrick] 07:53:40 09/26/00 JWT Clutch chatter, huh? Never heard that before. (n/m) - JohnQ 20:53:29 09/25/00 adjust your clutch pedal. (n/m) - Bernie 21:57:13 09/25/00 Clutch pedal engages about 1.5" from floor... (n/m) - rzncain 22:01:58 09/25/00 that's not good, adjust the pedal. check your e-mail. (n/m) - Bernie 05:32:48 09/26/00 What distance should pedal be off the floor? (n/m) - teahead 12:54:35 09/26/00 If I recall correctly, it was about 20 cm from the part of - Bernie 13:18:08 09/26/00
Post a Followup	You cannot reply to this message because you are not logged in.