Subject	for those future Big HP Z . I will be mounting two
Posted by	MikeH(Phoenix) on November 21, 2001 at 4:41 PM
	This message has been viewed 21 times.
Message	Z pumps in the gas tank in the next few weeks. Should be enough flow for over 1300 hp. Was going to put the second pump where the second float is in the top of the tank. It is the same bolt pattern and depth as the stock location. However, there is no baffle for the pick up tube as in the stock location. Would not be a problem if I alway ran with 1/2 tank of gas . If the second pump sucked air under acceleration, that would be bad. Will mount both on the same stock assembly. I've got it figured out. I'll take picks. Mike Arizona'a most powerful 600HP 15 second Z More powerful than a stock TT , slower than an NA Dynoed 515 rwhp and 420 ft.lbs @ 16psi 89 degrees. 533 rwhp and 450 ft. lbs @19 psi and slipping clutch and heat soaked motor , 85 degrees.
Follow Ups	for those future Big HP Z . I will be mounting two - MikeH(Phoenix) 16:41:38 11/21/01 sweet ass idea man (n/m) - SL103 17:08:30 11/21/01 When will she be running again,you gotta take me for a ride - CRVTKLR[phx] 20:21:55 11/21/01
Post a Followup	You cannot reply to this message because you are not logged in.