| Message |
they hold your tenstion on the lower part of the front suspenion. when u brake and it's shakes, it's eather warped rotors or busted tension rod bushing. OEM are silicon filled and are prone to leak. you can eather get the bushing replaced with poly ones from [ www.suspension.com ] for $33. plus what ever it might cost u for gettting them pressed in the rods if u can't have a press u use. and put the in yourself, ot it about 30 mins of labor at a shop. if u have a pry bar it's not that bad or if u have an air gun. but they are tight! or u can get the ADJ ones from who-ever but u only really need those if your caster is off and i would get the car alined, find out if your caster is off, and if it's not, get the bushing. if the caster is off, then get the adj ones. some places will let u come back and get it "re-alined" if they can't get it alined properly and u need to get new hard ware. taking the stock rods off and replacing the bushing and putting then back on will not affect the alinement. so don't warry about that.
[this space for rent] |
 |
