TwinTurbo.NET: Nissan 300ZX forum - Larger valves, aggressive cams likely also a waste
People Seeking Info
 
   


     
Subject Larger valves, aggressive cams likely also a waste
     
Posted by ZXoltan on May 06, 2021 at 10:09 AM
  This message has been viewed 264 times.
     
In Reply To IMO - The bedplate is a waste for anyone sub ~750hp. posted by Ghoztt (MD) on May 06, 2021 at 09:54 AM
     
Message unless you upgrade to large turbos.

The secret is not in any particular component but in achieving a synergy with all of the upgrades in harmony.

The one thing that seems to help across the board is opening up the intake and exhaust (aka "breather mods") but otherwise there are lots of things that do not yield good bang for the buck by themselves.

Other factors to consider include the type of fuel you intend to run and the injectors, as that can limit or extend the level of boost you can safely run. Again, many things must be considered to achieve a harmonious relationship between parts and get a satisfactory outcome ;-)

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.