Subject	Re: Need a flywheel and clutch kit
Posted by	Metacom on July 17, 2019 at 9:20 PM
	This message has been viewed 334 times.
In Reply To	Need a flywheel and clutch kit posted by amezcuaz32 on July 17, 2019 at 07:57 PM
Message	Before they were NLA a few years ago I ordered an OE TT clutch friction disk and pressure plate from Courtesy Nissan. Came packed in Nissan packaging etc, had Exedy stamped on the actual parts. You can pick up an Exedy clutch assy off Rockauto for about $100. Perfectly good for mostly stock setups. They are the OE manufacturer for most imports. Just had a flywheel resurfaced with the .008" step (debatable) for $75.
Follow Ups	Need a flywheel and clutch kit - amezcuaz32 19:57:32 07/17/19 Advice: - CameronSF 20:08:34 07/17/19 Re: Need a flywheel and clutch kit - itsa300zx 20:25:37 07/17/19 $250 cdn. For the kit so well within your budget. (n/m) - itsa300zx 22:22:27 07/17/19 Re: Need a flywheel and clutch kit - Metacom 21:20:58 07/17/19 Contact joe @ ZSPEED - Drk93TT 06:14:36 07/19/19 Me too... clutch died on me today! - RUZH 14:49:41 07/20/19 Was the clutch pedal adjusted properly? - MixManMash 07:57:32 07/22/19 The clutch pedal doesn't have any pressure... - RUZH 23:59:38 07/22/19 Hydraulics - ZXoltan 07:50:40 07/23/19 Unless the internal seals have failed, in which case you - MixManMash 19:09:58 07/23/19 I couldn't see any leaked fluids from the clutch cylinders - RUZH 13:42:13 07/24/19 The new SZ pressure plates are designed differently from - MixManMash 19:09:19 07/23/19 I wasn't very happy with the RPS 6 puck - RUZH 13:50:35 07/24/19 I agree. I have driven a Z32 with that same clutch. It's - MixManMash 20:59:28 07/24/19
Post a Followup	You cannot reply to this message because you are not logged in.