Subject	I used Dynamat 10455 and Kilmat 80 mil., both are
Posted by	Gordo NA2LS Daytona on May 29, 2019 at 7:54 AM
	This message has been viewed 373 times.
In Reply To	What brand of sound deadener do you use ... posted by David G on May 29, 2019 at 02:23 AM
Message	butyl-based and easy to apply. The Kilmat was significantly less expensive. Stay away from anything asphalt-based. In the hatch area and on the bulkhead behind the seats, I used Dynamat, then covered that with a second layer of Noico Green 170 mil, a very light weight self adhesive closed cell foam 1/6". It absorbs sound, but was used more for its heat insulation value; and to clean up the appearance of the randomly cut Dynamite pieces. https://noico.info/products/noico-green-170-mil-36-sqft-?ar-waterproof-sound-insulation/ _________________________________________________
Follow Ups	Door / Window Adjustment and Sound Proofing - Gordo NA2LS Daytona 13:11:06 05/26/19 Re: Door / Window Adjustment and Sound Proofing - zman03 14:47:16 05/27/19 Good. The trick is to tie the crash bars and the doorskin - Gordo NA2LS Daytona 21:40:49 05/27/19 I'm replacing my drivers door as soon as it gets back from - Musashi Sword 07:30:31 05/28/19 Good info, thanks! (n/m) - Barry (NJ) 16:22:09 05/28/19 Butyl rope works great between the crash bars and outer skin - mrchips 20:19:30 05/28/19 Yes it does. On my last Z, I used expanding latex foam - Gordo NA2LS Daytona 08:02:44 05/29/19 What brand of sound deadener do you use ... - David G 02:23:15 05/29/19 I used Dynamat 10455 and Kilmat 80 mil., both are - Gordo NA2LS Daytona 07:54:05 05/29/19 What are the differences between Dynamat and Kilmat ? - ZXoltan 11:44:18 05/29/19 I don't think there is any better about Dynamat; at least - Gordo NA2LS Daytona 20:42:57 05/29/19 Good to know. Thanks Gordo! (n/m) - ZXoltan 14:10:00 05/30/19
Post a Followup	You cannot reply to this message because you are not logged in.