Subject	Because it's the same design as every other failure prone
Posted by	Bernie (NoVA) on April 22, 2018 at 10:10 AM
	This message has been viewed 273 times.
In Reply To	Why? Too soft? Not durable? What is your thinking ?> posted by Gordo 96NA Daytona on April 21, 2018 at 09:30 PM
Message	arm like the Stillen or even the Z1 street. A straight through tube inside a poly bushing eats out the bushing eventually and ovals. The stock bushings are a multi piece design w. actual loaded bearings to isolate the pivot movement. Bernie Bilski berniebilski@cox.net President of Z-Car Club of Northern Virginia 1995 Nissan 300ZX TwinTurbo in Cobalt Green 1997 Nissan 240SX SE in Ultra Red 2006 Nissan Frontier SE in Ultra Black
Follow Ups	Rear Subframe Bushings: Diagnosis for Replacement - Gordo 96NA Daytona 10:20:58 04/21/18 Whiteline FUCA bushings are crap, also if you installed a - Bernie (NoVA) 15:59:12 04/21/18 Why? Too soft? Not durable? What is your thinking ?> - Gordo 96NA Daytona 21:30:59 04/21/18 Because it's the same design as every other failure prone - Bernie (NoVA) 10:10:53 04/22/18 Thx. Easy enough to keep an eye on a wearing FUCA bushing - Gordo 96NA Daytona 14:44:28 04/22/18 Whiteline subframe bushings don’t fit properly - ConVerTT 19:54:17 04/22/18 I went with ES bushings for the subframe and rear diff... - nissubaru 15:28:25 04/23/18 Worth doing sub-frame and diff bushings at the same time :) (n/m) - SkiFly01 11:29:09 04/24/18
Post a Followup	You cannot reply to this message because you are not logged in.