Subject	Re: V-band downpipes would be a necessary part of the deal.
Posted by	NIVO88T on April 13, 2018 at 11:07 AM
	This message has been viewed 551 times.
In Reply To	V-band downpipes would be a necessary part of the deal. posted by LitlElvis on April 12, 2018 at 09:23 PM
Message	Just having manifolds available to install the latest turbos is good enough. V Band downpipes are easy enough to make. with space behind the engine/trans to tie in both banks we could even use bigger turbos than GTX3067. I have a drawing somewhere where I was going to do this myself, similar to the Z31 Turbo but both banks feeding the other side. Using a "ghost" runner from one manifold going to the other side so instead of 3 into v band flange there would be 4 primaries into v band. So there would be 3 primaries from that bank feeding the turbo then the 4th primary from the opposite bank.
Follow Ups	Turbo manifolds..... - 90GoldZ 18:33:13 04/09/18 The best you can get now are MSP & Ash. (n/m) - PiotrC70 21:05:49 04/09/18 Fitment issues with the Ash manifolds... - MixManMash 07:49:08 04/10/18 Re: Fitment issues with the Ash manifolds... - NIVO88T 11:26:50 04/12/18 Problem is the re-clocking of the compressor housing - MixManMash 14:00:39 04/12/18 Re: Problem is the re-clocking of the compressor housing - NIVO88T 17:48:39 04/13/18 Don't forget the poverty manifolds route - Polish 21:53:32 04/10/18 For an exhaust manifold upgrade, at a 'reasonable' cost', - Gordo 96NA Daytona 09:14:05 04/12/18 would rather stick with OE mani's and overcompensate with - PiotrC70 20:29:55 04/12/18 As much as I agree with your sentiment, it doesn't work that - MixManMash 09:56:06 04/13/18 I actually wish I hadn't sold those flanges to you... - LitlElvis 10:43:31 04/10/18 You want them back? Lol - 90GoldZ 11:06:15 04/10/18 Glad to hear you're working on this Brett. I've wanted to - Zu4ea 11:28:21 04/10/18 Nice! - MixManMash 12:39:11 04/10/18 If you can find the dimensions for the housing, I'll see if - LitlElvis 09:54:25 04/11/18 Here you go. Hopefully this has enough info: - MixManMash 16:12:43 04/11/18 G-Series options would be great! (n/m) - sfarrah 17:00:57 04/11/18 Ill be the first to buy - Stanky (BC) 12:25:46 04/11/18 And if we can get V-band downpipes... (n/m) - MixManMash 16:40:32 04/11/18 so, looks like you'll be down for another year - vorpalZ 17:20:33 04/11/18 Lol. So true. (n/m) - MixManMash 21:42:13 04/11/18 Count me in! (n/m) - ConVerTT 20:25:45 04/11/18 Re: I actually wish I hadn't sold those flanges to you... - NIVO88T 11:33:18 04/12/18 I agree. It would be nice to have options of V-band, - MixManMash 16:28:18 04/12/18 V-band downpipes would be a necessary part of the deal. - LitlElvis 21:23:54 04/12/18 That's fantastic Brett! Really looking forward to it. (n/m) - MixManMash 08:50:32 04/13/18 Re: V-band downpipes would be a necessary part of the deal. - NIVO88T 11:07:30 04/13/18 How reliable are the V-band style clamps? - xpwarrior 16:36:53 04/13/18 Re: How reliable are the V-band style clamps? - NIVO88T 18:16:55 04/13/18 Thanks for the info. I'll probably go ahead and weld some - xpwarrior 21:11:11 04/13/18 Could I get a set of manis without the t3 flange? - BlackholeZ 23:58:17 04/17/18 I have a car with the greddy turbo kit - 90GoldZ 21:40:33 04/12/18 i laugh when people still want t3 from 1988 (n/m) - volcomstone550 04:17:26 04/14/18 you build these and you will be 'instant hero' !!! (n/m) - vorpalZ 12:25:12 04/13/18 Ooooohhhh - BlackholeZ 12:35:25 04/13/18 He's looking into it. - MixManMash 17:31:25 04/13/18 i modded a set of ASH manifolds for Tial vband - volcomstone550 04:16:14 04/14/18 CZP sells genuine MSP still - induetime 15:26:54 04/13/18 TDM complete kit. 4500 on ebay. someone go pick it up.. (n/m) - supergoji 15:53:35 04/19/18
Post a Followup	You cannot reply to this message because you are not logged in.