Subject	That is possible..I still stand by the ARP washers over OEM
Posted by	Kyle(Houston) on September 13, 2017 at 2:33 PM
	This message has been viewed 493 times.
In Reply To	I think there is more to the cracked washer than more torque posted by LitlElvis on September 13, 2017 at 12:07 PM
Message	The OEM washer is only .121" thick vs the ARP at .117". So you are talking only .004" difference between the two in thickness The ARP are .995" OD vs OEM that are .978". So the ARP are .017" bigger Also the ARP are chromoly and hardened. I am not sure on the OEM's. So I will personally still stick with the ARP over the OEM because they are bigger in diameter. Kyle "Grumpy Bear" Puckett Import Parts Pro Phone: 281-288-0700 AIM: KyleatIPP Yahoo: KyleatIPP
Follow Ups	Who's using the ARP Chromoly vs ARP 2000? - Zbullet 22:59:06 09/10/17 I use stock headbolts and no issues with 815WHP. - MixManMash 07:20:57 09/11/17 I was aware of that issue as well... - Zbullet 08:57:34 09/11/17 I bought ARP head studs and ordered the Z1 washers - Red Hawk (CO) 10:48:15 09/11/17 Who did you get the ARP kit from? - Bernie (NoVA) 19:29:45 09/11/17 Z1... ah, looks like I missed the part were the kit says - Red Hawk (CO) 08:26:36 09/13/17 Re: I use stock headbolts and no issues with 815WHP. - Kvert 14:18:15 09/12/17 Any idea if the ones you bought were advertised as ARP2000's (n/m) - Zbullet 14:52:18 09/12/17 are these the Chromoly or the 2000s? - Boostjuice 15:01:53 09/12/17 Re: are these the Chromoly or the 2000s? - Kvert 16:55:09 09/12/17 that's a bummer because kyle built my motor with whatever he - Boostjuice 17:07:10 09/12/17 Re: Any idea if the ones you bought were advertised as ARP2000's - Kvert 15:14:04 09/12/17 OEM. And I would replace the head gasket for peace - MixManMash 06:19:56 09/13/17 Article with some info on ARP head studs - Kvert 19:29:08 09/12/17 Lets set a few things straight - Kyle(Houston) 20:09:24 09/12/17 Thank you. (n/m) - Bernie (NoVA) 22:18:44 09/12/17 I think there is more to the cracked washer than more torque - LitlElvis 12:07:42 09/13/17 That is possible..I still stand by the ARP washers over OEM - Kyle(Houston) 14:33:31 09/13/17 Re: Lets set a few things straight - Scott ZShack Taylor 16:59:57 09/13/17 Re: Re: Lets set a few things straight - Kyle(Houston) 21:29:37 09/13/17 Re: Re: Re: Lets set a few things straight - Scott ZShack Taylor 13:53:12 09/14/17 Re: Re: Re: Re: Lets set a few things straight - Kyle(Houston) 18:16:33 09/14/17 Re: Re: Re: Re: Re: Lets set a few things straight - Scott ZShack Taylor 16:02:53 09/15/17 One last time - Kyle(Houston) 22:47:16 09/15/17 ARP 8740 vs ARP2000 vs stock... the truth vs the hype - LitlElvis 20:44:06 09/12/17 Great info. Thanks. (n/m) - Kyle(Houston) 21:15:46 09/12/17 Thank you. (n/m) - Bernie (NoVA) 22:20:45 09/12/17 Thank you, what's recommended torque for L19 's? (n/m) - JaffaUK 07:55:13 09/13/17 Question regarding the preload - ZXRider 12:50:50 09/15/17 Lots of great info! Many thanks for taking the time - Zbullet 23:00:41 09/12/17 Very informative. These discussions are what makes this site - Mike TDK (NoVA) 17:13:46 09/14/17
Post a Followup	You cannot reply to this message because you are not logged in.