Message |
Recently I've had a few people tell me they're having problems installing all six X member to chassis bolts with my kit. This appears to be due to more variation than I thought there would be in the chassis bolt hole locations, causing the large diameter washer face of the stock bolts to bind on the sides of the middle recessed holes on the slotted side. The fix is to use an Allen bolt in these positions (see diagram below) and from here on all new kits will include 2 Allen bolts. If you have had a problem installing these bolts, email me (brett@bde-performance.com) and I will send 2 Allen bolts to you. Because of their fine thread pitch, these Allen bolts (M10x1.25x16) are difficult to find at a local hardware store.
|
|