Subject	After working on 2 installations of the Rob Z throttle
Posted by	MixManMash on December 12, 2016 at 5:44 PM
	This message has been viewed 502 times.
In Reply To	Wanted to get some opions on my valves... posted by platinumist on December 12, 2016 at 05:19 PM
Message	bodies, I can honestly say, stay away. On both cars, I had a hell of time trying to set the TPS. There is some slop/play between the throttle body shaft and the TPS. It's almost as if the shaft has not been machined right. There really are no other options. You could try the Stanza throttle bodies or just stick with stock.
Follow Ups	Wanted to get some opions on my valves... - platinumist 17:19:53 12/12/16 After working on 2 installations of the Rob Z throttle - MixManMash 17:44:40 12/12/16 Have this been mentioned to ROB the slack / slop - CmyZ 19:13:49 12/12/16 Yep. I know SZ has mentioned it to him. (n/m) - MixManMash 23:09:15 12/12/16 Maybe a small shim can fix the issue. I have two sets - CmyZ 16:06:31 12/13/16 I do have a similar issue I believe - komplexZTT 19:46:12 12/12/16 Yep, that's the symptom. Definitely the slop between the - MixManMash 23:10:52 12/12/16 Was thinking of wrapping the shaft with something - komplexZTT 08:50:16 12/13/16 we had to do that on my set for Silver Zed - vorpalZ 09:28:10 12/13/16 Teflon tape worked genius, thanks! - komplexZTT 20:16:51 12/16/16 RobZ TB's: 54 mm stock overbore or 60mm CNC'd? - ZXoltan 15:49:46 12/14/16 The CNC'd 60mm. - MixManMash 23:09:22 12/14/16 I chased grey smoke on decel for 6 months - BlackholeZ 01:39:36 12/13/16 depending on how far u decided to go with the vavles - LivinTheDream 22:25:04 12/14/16
Post a Followup	You cannot reply to this message because you are not logged in.