Subject	I run 17x8.5 +30 in the front and they clear the brakes fine
Posted by	Nate (NoVA) on July 28, 2016 at 12:14 AM
	This message has been viewed 441 times.
In Reply To	Got the itch for RPF1... offset? posted by KA8 on July 27, 2016 at 07:26 PM
Message	The front spokes are curved to allow the caliper clearance. The 9" wheels have a different hub design and will cause problems. 18x9.5 + 38 in the rear fits perfectly. Make sure you get the correct sized hubcentric rings and correct threaded lugs as well. _______ AKA JohnnySombrero
Follow Ups	Got the itch for RPF1... offset? - KA8 19:26:08 07/27/16 Maybe. Good luck with caliper clearance with those wheels - MixManMash 21:39:46 07/27/16 I have the offset listed on TireRack for 8.5 F 10 R, 350Z - SMAZ (OKC) 23:13:36 07/27/16 Re: Got the itch for RPF1... offset? - KA8 23:22:13 07/27/16 I run 17x8.5 +30 in the front and they clear the brakes fine - Nate (NoVA) 00:14:35 07/28/16 I run 17x9.5 all around. 5mm spacer on the front - ZXRider 08:52:31 07/28/16 I run 18x8.5 et 30 w/ a 5mm spacer with enkei RP03s - DTTZ 13:41:47 07/28/16 Awesome! good to hear. Thanks all (n/m) - KA8 13:54:33 07/28/16 Awesome! good to hear. Thanks all (n/m) - KA8 15:19:57 07/28/16 I'm a fan for the 17" versions - Jason300zxTT 17:41:06 07/28/16 You'd definitely need a spacer in 17s with bigger brakes. (n/m) - MixManMash 06:44:57 07/29/16 This isn't necessarily true. - Nate (NoVA) 11:08:49 07/29/16 Front brakes with Stoptech. I couldn't made a 17x9 RPF1 - MixManMash 13:26:59 07/29/16 Yes, 17x8.5 has a different barrel and spoke design. (n/m) - Nate (NoVA) 14:21:35 07/29/16 18x9.5" +25 with 265/35/18 and 18x10" +38 285/35/18 (n/m) - ArubaDave 09:06:32 07/29/16
Post a Followup	You cannot reply to this message because you are not logged in.