Subject	Re: Yes but it's a waste of money & adds layers of failure point
Posted by	scarlet on June 29, 2016 at 1:36 PM
	This message has been viewed 405 times.
In Reply To	Yes but it's a waste of money & adds layers of failure point (n/m) posted by Bernie (NoVA) on June 29, 2016 at 07:34 AM
Message	I didn't have to pay for the selin so that was free basicly how I look at it so the apexi neo was used and I got for a killer deal so I am gonna try and utilize both because it doesn't hurt to be able to fine tune the air fuel and see exactly what the selin is sending to the ecu by intercepting the signal to the neo right? Plus I don't have to run another wire to the neo since it's only gonna be getting one input from the selin and one output to the ecu. The neo came with the specific harness for the ecu so I don't have to splice any wires. The chips I have ordered always seem to run the car a little rich and unless I want to spend 500 to 1000 for a custom tune job on a dyno this seems like a legit alternative
Follow Ups	selin dual maf and apexi neo? - scarlet 23:11:06 06/28/16 You could but the Neo can do the same thing the Selin does. - Bernie (NoVA) 23:41:17 06/28/16 Couldn't I get the same results? - scarlet 00:14:26 06/29/16 Yes but it's a waste of money & adds layers of failure point (n/m) - Bernie (NoVA) 07:34:01 06/29/16 Re: Yes but it's a waste of money & adds layers of failure point - scarlet 13:36:27 06/29/16 This is the worst possible way to tune. Modifying the air - MixManMash 14:57:41 06/29/16 Additionally, if it's running "rich," have you checked for - MixManMash 14:58:51 06/29/16 Why would you do that? There is absolutely no sane reason - MixManMash 08:13:35 06/29/16 Ive always been curious about that... - -Grimm- 09:55:09 06/29/16 well.. - Antihero 13:40:25 06/29/16 Exactly. The MAF sensor is non-linear. (n/m) - MixManMash 14:53:57 06/29/16 Re: Exactly. The MAF sensor is non-linear. - scarlet 15:15:15 06/29/16 Ouch! Sounds like you have bigger problems. (n/m) - MixManMash 16:09:32 06/29/16 Re: Exactly. The MAF sensor is non-linear. - scarlet 15:30:45 06/29/16 Anyone ever take one apart? - -Grimm- 19:13:41 06/29/16 if it's still in the box, sell the neo and get nistune. - Antihero 23:50:40 06/28/16 This - BlackholeZ 13:16:11 06/29/16 Agreed, but an off-the-shelf chip is not the same as a - MixManMash 14:58:16 06/29/16 Very true - BlackholeZ 02:54:48 06/30/16 ======Answers... - DVDBURN (MD) 01:40:56 07/01/16 The ECU interpolates MAF VQ table values - zromtech 13:53:19 07/01/16 In my experience it doesn't switch to the next table... - DVDBURN (MD) 15:50:56 07/01/16 To add...the interpolation is used to tell where in the... - DVDBURN (MD) 16:04:35 07/01/16 To try to make this even more simple... - DVDBURN (MD) 11:38:38 07/02/16 Re: To try to make this even more simple... - zromtech 12:19:33 07/02/16 but interpolation happens after the table lookup - zromtech 12:12:21 07/02/16 I'm talking about how the ECU knows how to place the MAF... - DVDBURN (MD) 19:26:25 07/02/16 CFM Table? - zromtech 09:49:05 07/03/16 I'm not saying that. - DVDBURN (MD) 14:21:22 07/03/16 Re: I'm not saying that. - zromtech 18:33:16 07/03/16
Post a Followup	You cannot reply to this message because you are not logged in.