Subject	Re: Most likely thinking of "soft valve" issue w/ 90
Posted by	wild_maxx on July 30, 2015 at 2:34 PM
	This message has been viewed 318 times.
In Reply To	Most likely thinking of "soft valve" issue w/ 90 (n/m) posted by FrozTTy on July 30, 2015 at 10:25 AM
Message	Here's a post by Ash from a few years ago HERE And here's some info about the soft valves. FWIW I had to replace all 12 intake valves on my 90' heads as I had the "soft valves" HERE
Follow Ups	I am rebuilding a set of heads for the first time and would - z32z 19:10:58 07/29/15 Depends how bent the valves are. Easier to see the bends - zxtuner161 07:52:57 07/30/15 You may be able to notice the material strain - -Grimm- 09:27:11 07/30/15 Thank you for the input. I placed each valve in a drill and - z32z 14:15:48 07/30/15 Most likely thinking of "soft valve" issue w/ 90 (n/m) - FrozTTy 10:25:46 07/30/15 Re: Most likely thinking of "soft valve" issue w/ 90 - wild_maxx 14:34:29 07/30/15 This is great info. Thanks. - z32z 15:45:10 07/30/15 Why not have the machine shop measure the valves? - zellamay 14:28:43 07/30/15 Lap valves - EngineerLV 21:05:31 07/30/15 Not necessarily true - ZXoltan 06:13:25 07/31/15
Post a Followup	You cannot reply to this message because you are not logged in.