Subject	The pad on a R33 Brembo is about 30% larger than Z32.
Posted by	evan_aggie on October 31, 2014 at 10:36 AM
	This message has been viewed 231 times.
In Reply To	i think mine are r33 or r32 specv. 324x30. stock mount. (n/m) posted by evan_aggie on October 30, 2014 at 08:32 PM
Message	I believe that number is correct, but Bernie would probably know for sure. That being said, I can tell you the stopping power was noticeably improved. I never fully bought into just moving your stock calipers outwards an inch just for a larger rotor. Yes, the force applied would be greater since the length from the pivot point is more, but you'll get double the benefit if your pad has 25-30% more surface area too.
Follow Ups	anyone using r33 brembo front and rear calipers - kevintandmd 19:42:17 10/30/14 i think mine are r33 or r32 specv. 324x30. stock mount. (n/m) - evan_aggie 20:32:14 10/30/14 The pad on a R33 Brembo is about 30% larger than Z32. - evan_aggie 10:36:16 10/31/14 The bolt on. You should use banjo lines. - Bernie (NoVA) 00:01:01 10/31/14 r33 setup makes no sense in 2014 - Antihero 14:27:44 11/01/14 Actually r33 = 350z - lidz 16:18:56 11/01/14 Agreed. Also the offset of the R33 calipers is sightly - Bernie (NoVA) 09:21:00 11/02/14 I think R33 GTR Calipers are a lot easier to come by in aus (n/m) - Antihero 09:33:51 11/02/14 Yes they are but the front & rears bolt onto a Z32 unlike - Bernie (NoVA) 10:28:04 11/02/14
Post a Followup	You cannot reply to this message because you are not logged in.