Subject	I don't know about the +18 offset
Posted by	ZXRider on October 27, 2014 at 11:27 AM
	This message has been viewed 254 times.
In Reply To	17x9.5 RPF1 fitment posted by BLACKTT3Z on October 27, 2014 at 12:37 AM
Message	but I run those wheels in 17x9.5" +38 all around. The rears fit without any modification needed. Front, you will need a 5mm spacer. With the 5mm spacer you won't need longer wheel studs as the lug nuts still get 8 full rotations before they get seated on the wheel surface. There will be a very small space between the calipers and the wheel spokes which should clear without any issues, but I personally felt safer having more clearance so I shaved down the caliper in the spots that I felt the wheel could contact. I removed probably only 1mm of the caliper corner which is barely noticeable. Remember that you will also need hub centric rings for the wheels.
Follow Ups	17x9.5 RPF1 fitment - BLACKTT3Z 00:37:00 10/27/14 17x9.5 +38 - lidz 04:12:18 10/27/14 ...and add a 5-7mm spacer to the fronts (n/m) - SuparexTT 09:33:01 10/27/14 sorry, was referring to rears only - lidz 15:24:34 10/27/14 Be careful with the spoke/barrel design of these wheels. - MixManMash 08:06:47 10/27/14 I don't know about the +18 offset - ZXRider 11:27:24 10/27/14
Post a Followup	You cannot reply to this message because you are not logged in.