Subject	Room is definitely cramped behind the double-din unit
Posted by	black300zx on June 15, 2014 at 7:53 AM
	This message has been viewed 245 times.
In Reply To	I was concerned since many single DIN stereos do not fit... posted by David G on June 15, 2014 at 03:57 AM
Message	so there isn't much room for wires. If you have an amp and are going to be hooking up RCAs, you might have to take off the center console side panels so that you can guide the wires around as you're installing the unit. I'm not running an amp and all of the RCA outputs are on a plug, so I just de-pinned the plug to remove all of the RCA plugs I didn't need, which freed up a lot of room. Of course I wrote down the pinout and saved the wires in case I ever need them. I went from this: To this:
Follow Ups	Do these Pioneer stereos fit in double din kit?? - David G 01:22:18 06/13/14 You should be able to install any double-din sized radio... - 90TT Zfan (E.Tenn) 07:13:54 06/13/14 FWIW, I had to adjust the holes on the brackets I got from - black300zx 11:19:53 06/13/14 Agreed, I had to modify the Zthirtytwo plastic brackets - vorpalZ 03:36:46 06/15/14 I was concerned since many single DIN stereos do not fit... - David G 03:57:39 06/15/14 Room is definitely cramped behind the double-din unit - black300zx 07:53:19 06/15/14 I'm not sure who @ Crutchfield measured it in 1990 but I hav - Bernie (NoVA) 21:44:47 06/15/14
Post a Followup	You cannot reply to this message because you are not logged in.