Subject	For those with a RameyZ engine slinger.
Posted by	Tanley on April 14, 2014 at 6:37 PM
	This message has been viewed 230 times.
Message	Does the sling bolt down tight onto the plenum or is there a small amount of play between the plenum and the sling?
Follow Ups	For those with a RameyZ engine slinger. - Tanley 18:37:01 04/14/14 Mine has 1/16" -1/8" play at bottom. No problems - Evan_Wright (Ca) 18:41:28 04/14/14 Thanks for the reply, mine has the same amount of play. - Tanley 19:40:46 04/14/14 Me too (n/m) - SMAZ (OKC) 19:59:18 04/14/14 Mine bolts down tight, used it 6-7 times now. (n/m) - TriniTT 22:59:29 04/14/14 No play in the one I used (n/m) - Piranha 00:35:17 04/15/14 Should not have any play. It should bolt down tight. - CmyZ 07:47:11 04/15/14 No play. (n/m) - Woody75 (Denver) 09:19:33 04/15/14 Mine has play on one side. (n/m) - Schmeal (NV) 11:04:35 04/15/14 It doesn't make any difference, your not trying to secure - Bernie (NoVA) 23:11:49 04/19/14
Post a Followup	You cannot reply to this message because you are not logged in.