Subject	This is what I did with mine.
Posted by	Obeeone on February 10, 2014 at 10:23 AM
	This message has been viewed 380 times.
In Reply To	if gonna do it..I would use compressed air on ALL posted by BarryGZX on February 09, 2014 at 11:24 AM
Message	I disconnected and removed the battery and then pressure washed the engine and engine bay when I bought my Z. It was really bad. Next I used my compressor and an air hose with a custom made nozzle to blow everything out. I disconnected almost all of the connectors that I could and blew them out too. I then sprayed each connector with some electronics cleaner as well. Let it stand in the sun with the hood up for the rest of the day. Connected everything back up and never had a problem for the 3 years I had the car. I took the gamble even after reading all the don't do it posts. It worked for me, but I also took a lot of precautions doing it.
Follow Ups	Pressure wash engine bay... - longlivetheZ 11:02:08 02/09/14 I've done it once, never again. Even wrap elect.w/Saran wrap (n/m) - itsa300zx 11:15:59 02/09/14 if gonna do it..I would use compressed air on ALL - BarryGZX 11:24:40 02/09/14 This is what I did with mine. - Obeeone 10:23:09 02/10/14 short answer - don't do it! (n/m) - 300ZMang 11:37:32 02/09/14 Your Z would not live long. (n/m) - pa300 11:47:11 02/09/14 The Z electrical connectors are very prone to moisture - jzack 11:55:08 02/09/14 Did that to the N/A a long time ago. It never ran the - 300MPH 12:51:37 02/09/14 Thanks for the feedback, everyone... - longlivetheZ 12:57:20 02/09/14 Harbor Freight McCullough steam cleaner worked well. - 280ZuL8r 13:13:23 02/09/14 Not a good idea...How I cleaned up my engine bay. - BlitZ91TT 14:04:17 02/09/14 Re: Pressure wash engine bay... - irdhp 16:21:24 02/09/14 Very bad advice - please don't post things like this if - jzack 23:14:09 02/09/14 Water is water but 60psi is not 200psi... (n/m) - TheMarlin (MidTN) 11:39:58 02/11/14 Take the engine and wiring harness out then do it (n/m) - John (MD) 07:33:49 02/10/14 Not even worth the effort if the engine is not coming out - LJZTT 10:43:54 02/10/14
Post a Followup	You cannot reply to this message because you are not logged in.