Subject	just adding another data point
Posted by	aliaZ on January 05, 2014 at 2:30 PM
	This message has been viewed 320 times.
In Reply To	About the 447s.... posted by ConVerTT on January 05, 2014 at 09:03 AM
Message	:Why are we re-hashing this again? This is the same discussion (that you linked in your original post) that we had a few months ago? Nothing has changed, has it? I thought I had installed Nismo subframe bushings, so I thought it would be useful to know that the 446's were the same length as the nismo bushings. I can't say for sure that the bushings I installed were specifically for a Z32. I know they're not S13 or S14 bushings. I like the whiteline bushings better than the Nismos, for what it's worth. The Nismo's are as hard as a rock. I ordered some 446's to install in their place.
Follow Ups	follow-up on whiteline subframe bushing issue - aliaZ 16:00:34 01/04/14 The Nismo bushings you installed are for S14. - Bernie (NoVA) 18:20:29 01/04/14 I didn't install S14 subframe bushings - aliaZ 03:18:40 01/05/14 Well they are also too short and required a spacer ... - ConVerTT 09:33:48 01/05/14 not sure what to tell you - aliaZ 14:41:15 01/05/14 Hopefully I will be able to agree re: best option ... - ConVerTT 09:46:31 01/06/14 Then what you likely have is R32/R33 bushings. (n/m) - Bernie (NoVA) 23:40:36 01/05/14 Example - Bernie (NoVA) 23:44:38 01/05/14 nope...that isn't it either - aliaZ 07:48:40 01/06/14 Bottom line is the 92446 is 10 mm too short and will require - ConVerTT 21:39:23 01/04/14 Bottom line is the 92446 will work but the 92447 won't - aliaZ 03:22:49 01/05/14 About the 447s.... - ConVerTT 09:03:44 01/05/14 just adding another data point - aliaZ 14:30:06 01/05/14 I agree with this and it's exactly what I had to do. (n/m) - Boosted1 07:48:04 01/05/14
Post a Followup	You cannot reply to this message because you are not logged in.