Subject	I didn't install S14 subframe bushings
Posted by	aliaZ on January 05, 2014 at 3:18 AM
	This message has been viewed 743 times.
In Reply To	The Nismo bushings you installed are for S14. posted by Bernie (NoVA) on January 04, 2014 at 06:20 PM
Message	The S14 bushing kit has different bushing part numbers for the front vs rear, and are windowed: The bushings I installed are solid rubber and the same height front and rear. No, I didn't save the box, so I don't know what the kit number was. While it is possible that I was scammed and bought a set of Z32 subframe bushings that weren't really Z32 subframe bushings, they sure as hell aren't S13/S14 bushings. :AFAIK Nismo didn't sell a Z32 specific application for frame bushings. :The Whitelines are sized for S14/S13 etc as well. Which is why they had the same problem.
Follow Ups	follow-up on whiteline subframe bushing issue - aliaZ 16:00:34 01/04/14 The Nismo bushings you installed are for S14. - Bernie (NoVA) 18:20:29 01/04/14 I didn't install S14 subframe bushings - aliaZ 03:18:40 01/05/14 Well they are also too short and required a spacer ... - ConVerTT 09:33:48 01/05/14 not sure what to tell you - aliaZ 14:41:15 01/05/14 Hopefully I will be able to agree re: best option ... - ConVerTT 09:46:31 01/06/14 Then what you likely have is R32/R33 bushings. (n/m) - Bernie (NoVA) 23:40:36 01/05/14 Example - Bernie (NoVA) 23:44:38 01/05/14 nope...that isn't it either - aliaZ 07:48:40 01/06/14 Bottom line is the 92446 is 10 mm too short and will require - ConVerTT 21:39:23 01/04/14 Bottom line is the 92446 will work but the 92447 won't - aliaZ 03:22:49 01/05/14 About the 447s.... - ConVerTT 09:03:44 01/05/14 just adding another data point - aliaZ 14:30:06 01/05/14 I agree with this and it's exactly what I had to do. (n/m) - Boosted1 07:48:04 01/05/14
Post a Followup	You cannot reply to this message because you are not logged in.