Subject	Ya I don't like using silicone either
Posted by	ZXRider on December 13, 2013 at 11:25 AM
	This message has been viewed 316 times.
In Reply To	shellac will still allow the plugs to be removed in the posted by aliaZ on December 13, 2013 at 11:12 AM
Message	I used the z31 water pump gasket to avoid using the RTV material for it. And sadly I used so little on the oil pan that my oil pan is leaking and needs to be re-sealed. I had to remove the engine after my first install because I had installed the plugs without any sealant and they were leaking. When I had the engine out for the second time I ended up just using the prematex rightstuff. I don't think I could have cause any issues, but I guess it's to late to worry about it now. I used the slightest amount so I don't think it's something to lose sleep over it. Next time I will use shellac. Buy Zama Posters Here I have nightmares about that happening...I'd be the poor bastard you'd hear about on the news that gets killed by a softball-size chunk while spreading out my body over the hood and screaming "Nooo!" (Having a conversation about hail damage) - BradZ (FL) on March 25, 2005 at 9:56 PM Tell your friend that you could take a dump, light it on fire and that would be hotter shit than his car. Probes suck, that's just all there is to it. - 300ZXpert (someday) on April 04, 2005 at 11:35 PM P.S. You REALLY are on here at ALL hours! And I thought I was bad! :) - zmenon on August 16, 2005 at 3:06 AM LOL...2+2 drivers should grow mullets..."Business in the front...party in the back" ;) - BradZ (FL) on November 29, 2005 at 4:45 PM
Follow Ups	Sigh...... - Tech@EPR 00:05:00 12/13/13 What the hell is in that pickup? Looks like solder slag! Lol (n/m) - ZinnZ32 01:12:20 12/13/13 What's wrong with the freeze plugs? - ZXRider 01:33:51 12/13/13 Re: What's wrong with the freeze plugs? - Tech@EPR 01:48:27 12/13/13 nice brass PEX fitting there. (n/m) - arrowenterprises 05:53:09 12/13/13 I don't see how the RTV could end up in there - ZXRider 11:00:45 12/13/13 Re: I don't see how the RTV could end up in there - Tech@EPR 21:38:25 12/13/13 Don't get offended. No need to get snappy - ZXRider 22:01:42 12/13/13 Re: Don't get offended. No need to get snappy - Tech@EPR 22:10:03 12/13/13 Re: Re: Don't get offended. No need to get snappy - Tech@EPR 22:23:34 12/13/13 Holy crap that's nuts. Way too much. I see what you - ZXRider 23:45:29 12/13/13 well its the difference between an experienced DIY'er and - LJZTT 23:51:39 12/13/13 Tomei intake = exposed main bolt = potential for oil leak - LitlElvis 10:21:18 12/14/13 Re: Tomei intake = exposed main bolt = potential for oil leak - Tech@EPR 11:40:42 12/14/13 Typically you just use shellac (n/m) - Bernie (NoVA) 02:24:46 12/13/13 Does that make a permanent bond? or would the plug be - ZXRider 11:02:34 12/13/13 shellac will still allow the plugs to be removed in the - aliaZ 11:12:01 12/13/13 Ya I don't like using silicone either - ZXRider 11:25:10 12/13/13 As an FYI, this is what we use at the shop for freeze plugs - dogpile 09:12:26 12/14/13 Agreed. This is what I used when I rebuilt my motor. - Mike TDK (NoVA) 15:19:26 12/14/13 wow...very creative. (n/m) - ILoveBoost 07:20:13 12/13/13 I'm surprised that small coolant hose didnt split from being - LJZTT 07:36:07 12/13/13 My reaction after looking at this thread - RobZ32 10:18:25 12/13/13 It's not uncommon, unfortunately - ThisIsSparTTa 10:22:19 12/13/13 Well, did it leak? (n/m) - zellamay 11:40:45 12/13/13 this is why I don't trust anybody to work on my car - moxie (SF) 12:10:55 12/13/13 Amen! (n/m) - Piranha 13:10:46 12/13/13 Re: Sigh...... - Rasta420 17:52:30 12/13/13 Re: Sigh...... - MaxxAction 20:22:17 12/13/13 Mhmmmmm - wild_maxx 07:34:47 12/14/13 More silicone is always better. (n/m) - Milo (Nismo Fiesta) 11:46:05 12/14/13 for breasts. (n/m) - slayer fan 13:31:20 12/14/13
Post a Followup	You cannot reply to this message because you are not logged in.