Subject	I do plan on getting more into AutoX
Posted by	Bellaco on November 01, 2013 at 10:23 AM
	This message has been viewed 213 times.
In Reply To	if you aren't going to be doing track days or autoX posted by LJZTT on November 01, 2013 at 09:12 AM
Message	This is my 3rd Z. Sold the first Z32 years back & missed it so I bought a Z33. I liked it but didn't mind selling it to help pay for my wedding last year. Just picked up this clean Z32 from the original owner with only 81K on the clock. Anyway, point I'm quickly sidetracking from is that I was always focused on taking my previous Z's to track days that were few & far between & at least 3 hours away. So this time around I plan on getting more seat time by doing more local AutoX. So I want to simplify things without doing harm to my engine that still sees mostly road miles.
Follow Ups	pcv plug size and vacuum port on lh side of plenum plug size - LivinTheDream 11:43:49 10/31/13 1/4" NPT. Don't overtighten or it will crack the manifold (n/m) - -Grimm- 13:36:12 10/31/13 It's actually 1/4" BSPT (British Standard Pipe Taper)... - LitlElvis 14:25:37 10/31/13 I've tapped it before with a 1/4" Npt Tap, However... - ZinnZ32 14:28:29 10/31/13 ^All of that - -Grimm- 15:02:37 10/31/13 What are you doing for a PCV? - Bellaco 18:45:13 10/31/13 you will still have the ventilation tubes coming from the - LJZTT 18:51:43 10/31/13 So if he leaves the front of the valve covers stock... - Bellaco 19:16:14 10/31/13 Is it sufficient ventilation? You're asking the wrong person - LJZTT 21:44:48 10/31/13 I hear you man - Bellaco 07:08:54 11/01/13 if you aren't going to be doing track days or autoX - LJZTT 09:12:27 11/01/13 I do plan on getting more into AutoX - Bellaco 10:23:03 11/01/13 Yea thats basically it. Blocking the LH exhaust valve cover - LivinTheDream 21:46:11 10/31/13 Thats a good idea - -Grimm- 11:00:34 11/01/13 THIS>> - LivinTheDream 21:42:49 10/31/13 I would trust SZ's recommendation - Bellaco 07:14:23 11/01/13 I think it's worthwhile (n/m) - -Grimm- 09:08:58 11/01/13 Greg instructed me to do the same. My valve cover is blocked - PiotrC70 23:15:01 11/01/13
Post a Followup	You cannot reply to this message because you are not logged in.