Subject	Replacing EFI harness with engine in
Posted by	Bumblebeetuna on August 20, 2013 at 11:38 AM
	This message has been viewed 353 times.
Message	For those of you that have replaced the EFI harness with the engine in, what have you found or used to make the job a little easier? Or is there a write up somewhere that I cant find? I have replaced one before with the engine out so i'm not totally new to the process. any suggestions are appreciated. Thanks in advance.
Follow Ups	Replacing EFI harness with engine in - Bumblebeetuna 11:38:47 08/20/13 I lower the front crossmember with the engine still attached (n/m) - toykoz32 11:59:41 08/20/13 I attempted the job with plenum removed but it was - JMartz 12:24:08 08/20/13 Re: I attempted the job with plenum removed but it was - GCamp 19:06:02 08/20/13 You are the man. (n/m) - JMartz 21:32:40 08/20/13 Drop the tranny, tilt engine forward. (n/m) - Nate (NoVA) 12:33:03 08/20/13 This^^ remove trans and plenum tilt forwards, pretty - white22sky 15:24:35 08/20/13 Liar. (n/m) - Bernie (NoVA) 01:04:34 08/21/13 Aww, that hurts. :-( (n/m) - Nate (NoVA) 08:11:33 08/21/13 I am replacing mine right now while I have the plenum - 300MPH 12:39:35 08/20/13 It was a pain in the ass - ZXRider 13:07:38 08/20/13 if you have popeye arms like Zfreak and hands like the - LJZTT 15:56:41 08/20/13 Not fun..... - Paulym1111 19:21:36 08/20/13 Just did one couple of weeks ago - vorpalZ 09:40:47 08/21/13 Re: Replacing EFI harness with engine in - sky z 12:26:15 08/21/13
Post a Followup	You cannot reply to this message because you are not logged in.