| Message |
However, I believe it would work. Reasoning: Your MBC is set to, say, 15 psi. When you get to higher RPM the MBC starts to open the wastegate, which is then forced to open by the pressure (and weak spring) and drops to, say, 12 psi (because the actuator pressure is constant) Now with an EBC, you can set to 15.0 sampled fairly often (I don't know the frequency but I assume its upwards of 50 Hz). When the exhaust gas starts to force the wastegate open the EBC will 'trick' the actuator by dialing down the pressure to keep at 15 psi.
|
 |