Subject	there is alot of things you can do ..
Posted by	Carlos Ramirez on June 26, 2013 at 12:52 PM
	This message has been viewed 210 times.
In Reply To	My original Z motor is pulled apart by Tony Myrie posted by eriksu9 on June 26, 2013 at 11:22 AM
Message	What you need to do is a different. It really depends on your cash situation. But some suggestions 1. Eagle rods are fairly cheap and upgrade from stock. 2. inspect the lifters and rebuild as necessary 3. check valve seats and recut if necessary 4. of course new piston rings, and bearings. 5. maybe do the PCV reroute 6. Fix your profile so its readable 7. Inspect your turbos 8. Replace the Nultec engine mounts are they are already broken or about too. 9. clean your radiator and condensor 10. clean the oil pan 11. Decide if you want any work on the heads. 12. Valve springs 13. BDE intake gears
Follow Ups	My original Z motor is pulled apart by Tony Myrie - eriksu9 11:22:14 06/26/13 there is alot of things you can do .. - Carlos Ramirez 12:52:30 06/26/13 Thanks for the input.. - eriksu9 14:26:47 06/26/13 only 4 things - The Devils Z 05:52:46 06/27/13 Are you still using GT28R turbos? You might want to - MixManMash 13:11:37 06/26/13 Re: I thought about your suggestions - eriksu9 14:29:17 06/26/13 It's not just about the peak numbers. - MixManMash 15:17:46 06/26/13 Is this your sheet MixMan? I have almost same mods - z-u-later 15:29:01 06/26/13 Nope. This is vorpalZ's sheet. - MixManMash 15:53:30 06/26/13 thats what I like more tq than hp! (n/m) - 300ZMang 16:28:41 06/26/13
Post a Followup	You cannot reply to this message because you are not logged in.