Subject	Re: Trouble fitting my New RPF1'S!!!! Try and Figure this Out!
Posted by	Buckaroo Banzai on April 24, 2013 at 12:11 AM
	This message has been viewed 247 times.
In Reply To	Trouble fitting my New RPF1'S!!!! Try and Figure this Out! posted by aarondc805 on April 24, 2013 at 12:06 AM
Message	How are your tension rod bushings? If they are worn to the point they allow a lot of slop they may be the culprit. When mine went out I had a tire wear through the front side of my driver side fender liner.
Follow Ups	Trouble fitting my New RPF1'S!!!! Try and Figure this Out! - aarondc805 00:06:35 04/24/13 Re: Trouble fitting my New RPF1'S!!!! Try and Figure this Out! - aarondc805 00:08:21 04/24/13 Re: Trouble fitting my New RPF1'S!!!! Try and Figure this Out! - Buckaroo Banzai 00:11:20 04/24/13 If he is running powertrix FUCA's he shouldn't have rubber - intel 00:26:41 04/24/13 Re: If he is running powertrix FUCA's he shouldn't have rubber - Buckaroo Banzai 01:58:37 04/24/13 shouldn't =/= doesn't (n/m) - MixManMash 07:23:37 04/24/13 Re:ALL - aarondc805 19:12:16 04/24/13 Are the wheels 8.5" or 9.5" wide? - ZXRider 01:22:18 04/24/13 Sidwall too large up front imo - gnozahs 01:55:49 04/24/13 Sidewall is 110.25mm. The 275/40 is 110mm. - MixManMash 02:42:10 04/24/13 Check your tension rods (n/m) - Z32TT-R 08:29:06 04/24/13 I used to run this setup on my old RPF1's and had no problem - *BK300ZX* 08:50:07 04/24/13 +35 is not the same fitment on 8.5 as it is on a 8.... - LJZTT 12:06:49 04/24/13 True, but I am running 17x9 +35 with 275/40/17 without - MixManMash 14:10:46 04/24/13 same fascia? same ride height? - LJZTT 09:03:39 04/25/13 Yeah, Im currently running 18x9.5+38 with a 10mm spacer up - *BK300ZX* 17:55:23 04/24/13 Agreed. The lack of caliper clearance on the RPF1s make it - MixManMash 19:38:36 04/24/13 Head to an alignment shop, that doesn't add up. (n/m) - TriniTT 17:37:57 04/24/13
Post a Followup	You cannot reply to this message because you are not logged in.